MRAE 2023 2ND INTERNATIONAL CONFERENCE ON MODERN RESEARCH IN AEROSPACE ENGINEERING 21st September - 22nd September 2023

LABORATORIES

1. Aerodynamics Lab, equipped with subsonic wind tunnel and smoke tunnel, provides opportunities to study aerodynamic characteristics & flow patterns on different aerofoil, circular cylinder and aircraft test models.

Lab equipment available are,

  • Wind tunnels
  • Smoke tunnel
  • 3 Component force balance
  • Hot wire anemometer
  • 16 Channels pressure scanner
  • Reynolds apparatus
  • WIND TUNNEL

  • CO-AXIAL JET FLOWS, WIND TUNNEL

  • FLOW VISUALIZATION SET UP

  • REYNOLDS APPRATUS

  • SMOKE TUNNEL

  • Fully digital subsonic wind tunnel

2. We have Aircraft Structures laboratory and Vibrations Laboratory at AIAE to impart practical skills to students to analyse stress and strain in aircraft components through photo elastic bench.

Equipment available at Aircraft Structures Laboratory are:

  • Digital Fatigue Machine
  • Two Hinged Arch Apparatus
  • Wagner Beam Setup
  • Stroboscope
  • Whirling speed of shaft apparatus
  • Logarithmic decrement measuring equipment
  • Natural frequency measuring system
  • PHOTO ELASTIC BENCH

  • TORQUE CELL

  •  

3. What better way to learn the mechanism of a jet engine than to get exposed to it first-hand.

Aircraft propulsion at AIAE is equipped with:

  • Flame Propagation Unit
  • Nozzle Pressure Test Unit
  • Reaction Turbine Test Rig
  • Subsonic Ramjet Engine
  • AIRCRAFT ENGINE

  • AIRCRAFT ENGINE

  • AIRCRAFT'S ENGINE COMPONENTS

  • PROPELLER

  • 4 CYLIDER DEISEL ENGINE

  • COMPONENTS OF AUTOMOBILE ENGINE

  • CUT SECTION OF ENGINE,TATA SUMO

  • GEAR BOX ASSEMBLY

  • REAR AXLE TATA

  • ENGINE COMPONENTS, PROPULSION LAB

4. The MATLAB platform is optimized for solving engineering and scientific problems to analyze and design the systems and products transforming our world.

Computer Systems & Simulations lab consists of:

  • Programming in C, C++
  • MATLAB simulation using Simulink
  • MATLAB Programming
5. Students can gain huge knowledge of flow field parameter and structural behaviour of aerodynamic control surfaces through accurate flow visualization and flow field property measurements.

FEM / CFD Lab consists of:

  • Highly specialized lab with Star CCM+ Software and ANSYS 14 Workbench with Mechanical APDL Software
6. Labs of inter-disciplinary domains, are available for students
  • Elements of Mechanical Engineering Lab, Engineering Mechanics Lab, Applied Physics Lab, Applied Chemistry Lab etc.
  • Amity Institute of Technology, Aeronautical and Automobile Engineering lab set up by TATA TECHNOLOGIES
  • 3 D PRINTER SAMPLES

  • 3D PRINTER

  • UTM Set Up

  • CNC LASER MILLING MACHINE

  • CNC MILLING MACHINE

  • AIRCRAFT SIMULATION LAB

  • AIRCRAFT SIMULATOR

  • LATHE MACHINES

  • MILLING MACHINE