LIST OF PUBLICATIONS IN JOURNAL

  • Weighted Least Squares Kinetic Upwind Method (WLSKUM) for computation of flow through blade passage with Kinetic Periodic Boundary Condition (KPBC), by Konark Arora, N. K. S. Rajan and S. M. Deshpande, Computational Fluid Dynaics Journal, Vol 16, No. 3:31, 2008, pp. 300-319.
  • Least Squares Kinetic Upwind Mesh-free (LSKUM) Method , by S.M. Deshpande, V. Ramesh, Keshav Malagi and Konark Arora, Defence Science Journal, Vol 60, No. 6, November 2010, pp. 583-597.
  • Numerical Investigation of Lateral Characteristics of an Air-to-Air Missile, by R. Balasubramanian, Vaibhav Shah, Konark Arora, R. Krishnamurthy and Debasis Chakraborty, AIAA Journal of Aircraft, Volume 50, No. 1, January-February 2013, pp. 88-95.
  • Separation Dynamics of Air-to-Air Missile using a grid-free Euler Solver, by K. Anandhanarayanan, Konark Arora, Vaibhav Shah, R. Krishnamurthy and Debasis Chakraborty, AIAA Journal of Aircraft, Volume 50, No. 3, May-June 2013, pp. 725-731.
  • Influence of aircraft flow field on the longitudinal stability of a missile, by Konark Arora, K. Anandhanarayanan, R. Krishnamurthy and Debasis Chakraborty, De- fence Science Journal, Vol 63, No. 3, May 2013, pp. 242-248.
  • A simple hybrid finite volume solver for compressible turbulence, by K. Chakravarthy, Debasis Chakraborty and Konark Arora, International Journal for Numerical Meth- ods in Fluids (IJNMF), Volume 77, Issue 12, 30th April, 2015, pp: 707-731.
  • Abdul Khaliq, Basant K Agrawal,¬¬ Rajesh Kumar. First and second law investigation of waste heat based combined power and ejector-absorption refrigeration cycle. International Journal of Refrigeration, 35,pp.88-97,2011.
  • Basant K Agrawal¬¬, Munawar N Karimi.Thermodynamic performance assessment of a novel waste heat based triple effect refrigeration cycle. International Journal of Refrigeration, 35,pp. 1647-1656, 2012.
  • Munawar N Karimi, Basant K Agrawal¬¬. Parametric analysis of a waste heat based combined ejector- absorption refrigeration cycle. International journal of sustainable development and green economics, 2, pp. 2315-2321, 2013.
  • Munawar N Karimi, Basant K Agrawal¬¬. Thermodynamic performance assessment of a novel waste heat based ejector refrigeration system. International journal of mechanical engineering and research, 3, 2013
  • Singh, S., and Ghosh, A. K., “Longitudinal Parameter Estimation using Wind Tunnel and Simulated Flight Data of Missile Configuration,” Journal of Aerospace Sciences and Technologies, The Aeronautical society of India, Vol. 59, No. 2, May 2007, pp. 102-120. (National)
  • Singh, S., and Ghosh, A. K., “Estimation of Lateral-Directional Parameters using Neural Networks based Modified Delta Method,” The Aeronautical Journal, Vol. 111, No. 1124, Oct.2007, pp. 659-667. (International)
  • Kalra, A., Anand, P., and Singh, S., “Flight Simulation Using Graphical User Interface” Advances in Aerospace Science and Application, Vol 4, No.1, Feb. 2014, pp. 85-90. (National)
  • Singh, S.,Sahanpal, M., Narula, A., Kaur, J., Rao. Y., and Amar, A.B.,“Design and Development of Micro Aerial Vehicle” Advances in Aerospace Science and Application, Vol. 4, No.1, Feb. 2014, pp. 91- 98. (National)
  • Singh, S.,“Estimation of Longitudinal Derivatives of Hansa-3 Aircraft” International Journal of Computer & Mathematical Sciences, Vol 2, Issue 4. March 2014, pp. 20-25. (International)
  • J. Sinha, “Studies on the transition of flow oscillations over an axisymmetric open cavity model”, Advances in Aerospace Science and Applications, Vol. 3, No. 2, pp. 83-90, 2013.
  • J. Sinha, S. Das, P. Kumar and J. K. Prasad, “Computational investigation of control effectiveness on a near transition open and closed axisymmetric cavity”, Advances in Aerospace Science and Applications, Vol.4, No.1, pp. 45-52, 2014
  • A. Shukla, S. Tanwar, M. Sorout and J. Sinha, “Design of Experimental Set-up for Propeller Test Rig and Thrust Calculation at Different RPM”, International Journal of Applied Engineering Research”, Vol. 9, No. 4, pp. 391- 395, 2014.
  • J. Sinha and D. Sahoo, “COMPUTATIONAL INVESTIGATION OF EFFECT OF SPIKE ON THE SUPERSONIC FLOW-FIELD PARAMETER OVER AN AXISYMMETRIC OPEN CAVITY” International Journal of Mechanical Engineering, Vol. 1, Spl. Issue-1, pp. 24-26, 2014.
  • P.Goyal et al., (2015) "Evaluation of Methanol Gasoline Fuel Blends and Exhaust Emission of Single Cylinder Spark Ignition Engine", Iranica Journal of Energy and Environment, (SCOPUS; ISSN: 2079-2115).
  • P.Goyal et al., (2015) "Conversion Efficiency of Catalytic Converter" International Journal of Ambient Energy, Taylor & Francis (Thomson Reuters, ISSN: 0143-0750
  • Priyanka Goyal., and S.K.Sharma., "Review on opportunities and difficulties with HCNG as a future fuel for Internal Combustion Engine," Journal of Advances in Aerospace Science and Applications, Vol. 4, No. 1, Feb 2014, ISSN 2277-3223,pp. 79-84.
  • P.Goyal et al., (2015) "Improve Intake Manifold Design for I.C Engine Emission Control", Journal of Engineering Science & Technology (JESTEC), Vol 11, Issue 4, (SCOPUS; ISSN: 1823-4690).
  • P.Goyal et al.,(2014) "A Technical Review on Biodiesel Fuel Emissions and Performance Parameters on Automobiles and Industrial Application", International Journal of Modern Engineering Research, Vol.4, Issue 11, Nov. (ISSN: 2249-6645).
  • Vivek Kumar, Saquib Reza and Ankur Vats, "Design And Simulation Of Cuk Converter With State Space Analysis Using MATLAB-Simulink," International Journal of Applied Engineering Research, ISSN 0973-4562 Volume 10, pp. 13123-13133, Number 5, 2015.

LIST OF PUBLICATIONS IN CONFERENCES / SYMPOSIUM

  • LES of flows over backward facing steps using digitally filtered inflow conditions, by V. Kalyana Chakravarthy, Konark Arora and Debasis Chakraborty, in “17th Annual AeSI CFD Symposium”, organized by CFD Division of AeSI, 11th − 12th August, 2015, NAL, Bangalore.
  • Flow simulation around a helicopter, by Konark Arora, K. Anandhanarayanan, R. Krishnamurthy and Debasis Chakraborty, in “17th Annual AeSI CFD Sym- posium”, organized by CFD Division of AeSI, 11th − 12th August, 2015, NAL, Bangalore.
  • Determination of Captive Loads on Camera POD in presence of Aircraft, by Ch. Venkateswarlu, Konark Arora, K. Anandhanarayanan, R. Krishnamurthy and De- basis Chakraborty, at ‘26th National Convention of Aerospace Engineers and Na- tional Seminar on Expanding Frontiers in Aerospace Technologies - Challenges and Opportunities’, November 24th − 25th,2012, Hyderabad, India.
  • Influence of aircraft flow field on the longitudinal stability of a missile, by Konark Arora, K. Anandhanarayanan, R. Krishnamurthy and Debasis Chakraborty, SAROD- 2011, November 16th − 18th,2011, Bangalore, India .
  • Solution Adaptive Grid Generation , by Konark Arora, R. Balasubramanian and K. Anandhanarayanan, in “13th Annual AeSI CFD Symposium”, organized by CFD Division of AeSI, 11th − 12th August, 2011, IISc, Bangalore.
  • Weighted Least Squares Kinetic Upwind Meshfree Method (WLSKUM) with Auto-matic Point Generation , by Konark Arora and S.M. Deshpande, in “12th Annual AeSI CFD Symposium”, organized by CFD Division of AeSI, 11th − 12th August, 2010, IISc, Bangalore.
  • LED (Local Extremum Diminishing) Property of Multidimansional WLSKUM-ED (Weighted Least Squares Kinetic Upwind Meshless Method using Eigendirections), by Konark Arora and S.M. Deshpande, 8th ACFD Conference, January 10-14, 2010, Hongkong SAR, China.
  • Accuracy and Robustness of Kinetic Meshfree Method (KMM), by Konark Arora and S.M. Deshpande, Conference on Parabolic and Hyperbolic PDEs and their Applications, November 21-25, 2009, IIT Bomay, Mumbai, India.
  • Accuracy and Robustness of Kinetic Meshfree Method (KMM), by Konark Arora and S.M. Deshpande, at 5th International Workshop on Meshfree Methods for Partial Differential Equations, August 17-19, 2009, Bonn, Germany.
  • On the Robustness and Accuracy of Least Squares Kinetic Upwind Method (LSKUM), by Konark Arora, N.K.S. Rajan and S.M. Deshpande, 12th Asian Congress of Fluid Mechanics (ACFM), August 18-21, 2008, Daejeon, Korea.
  • On the Order of Accuracy of Gridfree Methods using Defect Correction with In- ner Iterations, by Konark Arora, N.K.S. Rajan and S.M. Deshpande, 7th ACFD Conference, November 26-29, 2007, Bangalore, India.
  • Kinetic Least Squares Meshless Method using Eigendirections, by Konark Arora, N.K.S. Rajan and S.M. Deshpande, at 4th International Workshop on Meshfree Methods for Partial Differential Equations, September 17-20, 2007, Bonn, Ger- many.
  • Weighted Least Squares Kinetic Upwind Method (WLSKUM) for computation of flow through blade passage with Kinetic Periodic Boundary Condition (KPBC), by Konark Arora, N. K. S. Rajan and S. M. Deshpande, SAROD-2005, December 7th − 9th,2005 Hyderabad, India.
  • Weighted Least Squares Kinetic Upwind Method (WLSKUM) using Eigenvector Basis, by Konark Arora, N. K. S. Rajan and S. M. Deshpande, in “8th Annual AeSI CFD Symposium”, organized by CFD Division of AeSI, 11th − 13th August, 2005, IISc, Bangalore
  • Rotational Symmetry, Low Dissipation and Use of Eigendirections in Weighted LSKUM, by S.M. Deshpande, Anil N, Arora K and K.S. Malagi, Conference ’Nu- merical Analysis and Their Challenging Applications’, CSC Life Science Centre, ESPOO, Finland, Oct 6-7, 2005.
  • Some Fascinating New Developments in Kinetic Schemes, by S. M. Deshpande, N. Anil, K. Arora, K. Malagi and M. Varma - Invited talk in “Workshop on Modeling and Simulation in Life Sciences, Materials & Technology”, December 7-8, 2004, Department of Mathematics, IIT Madras, Chennai - 600036, India.
  • Munawar N Karimi, Basant K Agrawal. Exergy analysis of waste heat operated combined power and ejector refrigeration cycle. International conference on manufacturing excellence (manfex-March, 2012), Amity University Uttar Pradesh
  • Munawar N Karimi, Basant K Agrawal. Exergy analysis of waste heat based combined Rankine ejector-absorption refrigeration system .International conference on energy security ,global warming and sustainable climate, Solaris, Feb., 2012, BHU,VANARAS
  • Munawar N Karimi, Basant K Agrawal. Review: Theoretical and experimental Exergy analysis of waste heat based combined power and ejector cycle. International Conference on Innovative Technologies in Mechanical Engineering, Aug., 2012, Krishna Institute of Enginneing & Technology, Ghaziabad
  • Munawar N Karimi, Basant K Agrawal “Thermodynamic Performance assessment of a novel waste heat based ejector refrigeration system”. WORLD CONGRESS on Frontiers of Mechanical and Automobile Engineering, Feb.,2013, IIT, DELHI.
  • Basant K Agrawal¬¬A review. “Application and analysis of ejector refrigeration system”. International conference on advancements in mechanical engineering, August 2014, ALF University, Faridabad
  • Singh, S., and Ghosh, A. K., “Parameter Estimation from Flight Data of a Missile using Maximum Likelihood and Neural Network Method,” AIAA-2006-6284, AIAA Atmospheric Flight Mechanics Conference and Exhibit, Keystone, Colorado, US, Aug., 2006. (International)
  • Singh, S., and Ghosh, A. K., “Improved delta Method for Parameter Estimation from Real Flight Data using Neural Networks,” 17th IFAC Symposium on Automatic Control in Aerospace, Toulouse, France, June 2007. (International)
  • Singh, S.,Singhal, A., and Ghosh, A. K., “Estimation of Longitudinal Stability and Control Derivatives from Flight Data using Modified Delta Method,” 3th Symposium on Applied Aerodynamics and Design of Aerospace Vehicles: SAROD-2007, Thiruvananthapuram, India, Nov 2007. (National)
  • Singh, S., and Ghosh, A. K., “Modified Delta Method for Longitudinal Parameter Estimation from Flight Data of Unstable Aircraft,” 4th International Conference on Theoretical, Applied, Computational and Experimental Mechanics, IIT Kharagpur, India, Dec 2007, pp. 97-100. (International)
  • Singh, S., and Ghosh, A. K., “Data compatibility check and estimation of longitudinal parameters from flight data,” 4th International Conference on Theoretical, Applied, Computational and Experimental Mechanics, IIT Kharagpur, India, Dec 2007, pp293-295.
  • Singh, S.,Singhal, A, and Ghosh, A. K., “Estimation of Longitudinal Aerodynamic Coefficient of Hansa-3 Aircraft using Neural Network based Modified Delta Method International Conference on Mathematical Problems in Engineering, Aerospace, and Sciences, June, 2008, at University of Genoa, Genoa, Italy.
  • Singh, S., and Ghosh, A. K., “Modified Delta Method for Estimation of Parameters from Flight Data of Stable and Unstable Aircraft,” 3rd International Advance Computing Conference, AKG, Ghaziabad, India, Feb 2013, pp. 768-774.
  • Priya and Singh, S., “Application of Neural Networks for Flight Simulation,” 1st IEEE International conference on Power Electronics, Intelligent Control and Energy Systems (ICPEICES 2016), DTU, Delhi, India, July 2016, pp. 2799-2803.
  • R. K. Chauhan., and Singh, S., Application of Neural Networks Based Method for Estimation of Aerodynamics Derivatives, 7th International Conference on Cloud Computing, Data Science & Engineering, Amity University U. P., India, Jan 2017.
  • S Reza and Shahnawaz, "Working of smart material" National conference on Innovative trends in engineering systems, Mar, 2008, at Z.H.C.E.T, Aligarh Muslim University, India.
  • Vamsikrishna Undavalli, Anmol Kumar , Yash Gupta , Ramanan S and Md. Saquib Reza,” Medium scale jet engine design and design validation through simulation” at first international conference of Modern Research in Aerospace Engineeing September 22, 2016, Noida, India.
  • J. Sinha, S. Das, P. Kumar and J. K. Prasad, “Studies on an Axisymmetric supersonic Cavity with Front Wall Inclinations”, 15th Annual CFD Symposium 2013, Paper No. CP-38, August 9th -10th, 2013, IISc Bangalore, India.
  • J. Sinha, S. Das, P. Kumar and J. K. Prasad, “Analysis of Axisymmetric Three dimensional supersonic Cavity at different angle of attack”, National Conference on Wind Tunnel testing (NCWT 04), 2015, March 19th -20th, 2015, Defense Research and Development Lab, India.
  • S. Koteeswaran, S. Garg, S. Chaudhury and J. Sinha, “Computational Studies on a missile configuration with different wrapped around fins”, Proceedings of 7th Symposium on Applied Aerodynamics and Design of Aerospace Vehicles (SAROD 2015), Vol. 1, pp. 173-177, December 3rd-5th, 2015, Vikram Sarabhai Space Center, India.
  • Arpit Tiwari, Greeshma G. Kurup, Sundar Bhandari, Triveni Syamla, Jayanta Sinha, “Computational Studies on an Axisymmetric Supersonic cavity with Rear wall inclinations”, Proceedings of the International Conference on Computer Aided Engineering (CAE 2015), Paper No. 129CF, pp. 168-172, December 10th-12th, 2015, Hyderabad, India
  • Divyansh Chahar and Jayanta Sinha, “Computational Studies on NASA 1015 LRN-IL Airfoil for Laminar and Turbulent condition at different angles of attack”, Proceedings of the International Conference on Computer Aided Engineering (CAE 2015), Paper No. 187CF, pp. 213-218, December 10th-12th, 2015, Hyderabad, India.
  • Gaurav Sharma, Md. Naimuddin, Gaurav Chopra, Jayanta Sinha and Gagan Sharma, “Numerical Analysis of Flow Field over Compound Delta Wing at Subsonic and Supersonic Speeds”, IEEE Aerospace Conference, Montana, 12-16th March 2016, USA.
  • R. Abishek, Bhavesh Gulati and Jayanta Sinha, “Computational Analysis for Drag Reduction Using FishBAC Morphing Concept”, 18th Annual CFD Symposium, 10-11 August, 2016, NAL Bangalore, India
  • Aishwarya Kushary, Anjali Chopra, Jayanta Sinha and Vamsikrishna Undavalli, “Computational Investigation of the Effect of Various Spike Geometries Mounted on Supersonic Vehicles”, 1st International Conference on Modern Research in Aerospace Engineering (MRAE Published in -2016), 22-23 September, 2016, India
  • Anupam Tiwari, Jayanta Sinha, Vishakha Baghel, Gouresh Sood, and Aayushi Agrawal, “Magnetic Analysis of an Electromagnetic Band Brake (EMBB),” 1st International Conference on Modern Research in Aerospace Engineering (MRAE Published in -2016), 22-23 September, 2016, India
  • Priyanka Goyal., and S.K.Sharma., "Review on opportunities and difficulties with HCNG as a future fuel for Internal Combustion Engine," International Conference on Innovative Trends in Mechanical, Material, Manufacturing, Automotive, Automobile and Aeronautical Engineering, Feb, 2014, at Jawaharlal Nehru University, India.
  • Priyanka Goyal., and Vivek Kumar., "Alternative Fuels- opportunities, difficulties and future aspects," National Conference on Alternative Fuels and Controls for Automobile, pp no. 120-124, March, 2013, at Manav Rachna International University, India.
  • P.Goyal et al., (2014) "A Technical Review of Automobile Catalytic Converter: Current Status and Perspective", International Conference on Energy Technology, Power Engineering & Environmental Sustainability, Strategic Technologies of Complex Environment Issues-A Sustainable Approach- Pg.no. 171-179. (ISBN: 978- 93- 83083-85-5.)
  • Vivek Kumar and Padmini Singh., Journal of Advances in Aerospace Science and Applications, Vol. 4, No. 1: An approach to inverter-less STATCOM by using dual virtual quadrature source concept, Feb 2014, ISSN 2277-3223,pp.103-112,JNU,India.
  • Ankur Vats,Vivek Kumar and Saqib Reza., Modern Research in aerospace engineering,MRAE Published in : Experimental Investigation of Flame speed of Fuel Air Mixture for Varying Air/Fuel Ratio, Sep 22-23, 2016,Noida,India.
  • Shubhrasmita Mandal, Krishna Maheta, Vivek Kumar and MS Prasad, Modern Research in aerospace engineering,MRAE Published in : Control of UAV using GSM technology, Sep 22-23, 2016,Noida,India.
  • Jayanta Sinha and Konark Arora, “Review of the flow field analysis over cavities”, Proceedings of International Conference on Infocom Technologies and Unmanned Systems with Conference, IEEE Xplore, 2018.
  • BASANT K. Agrawal. “Exergy analysis of a ejector based tri-generation cooling cycle”. Feb 2017, NIET, Gr.Noida.
  • R. K. Chauhan., and Singh, S., “Application of Neural Networks Based Method for Estimation of Aerodynamics Derivatives,” 7th IEEE International Conference on Cloud Computing, Data Science & Engineering, Amity University U. P., India, Jan 2017.
  • R. K. Chauhan., and Singh, S., “Aerodynamic Modelling of Quasi Steady Stall Using Neural Network Based Gauss Newton Method” IEEE International Conference on Infocom Technologies and unmanned systems, Amity University Dubai, Dec 2017.
  • Md Saquib Reza and Dr. Konark Arora, International conference on infocom technologies and unmanned systems.: “Contour Design of Aerospike Nozzle and Comparison of Performance”, Dec 18-20, 2017,Dubai, UAE
  • Hari Om Verma, N. K. Peyada, Singh. S., “Review of Aerodynamic Parameter Estimation Techniques”, IEEE International Conference on Infocom Technologies and unmanned systems, Amity University Dubai, Dec 2017
  • Soni Gupta, "Analysing the Effect of scintillation on free space optics using different scintillation models @6th International conference on Signal Processing and integrated Network (SPIN)" , March 8th-9th 2019, ASET Amity University Noida
  • R. Abishek, Bhavesh Gulati and Jayanta Sinha, “Computational Analysis for Drag Reduction Using FishBAC Morphing Concept”, 18th Annual CFD Symposium, 10-11 August, 2016, NAL Bangalore, India
  • Vamsikrishna Undavalli, Anmol Kumar , Yash Gupta , Ramanan S and Md. Saquib Reza,” Medium scale jet engine design and design validation through simulation” at first international conference of Modern Research in Aerospace Engineeing September 22, 2016, Noida, India.
  • Aishwarya Kushary, Anjali Chopra, Jayanta Sinha and Vamsikrishna Undavalli, “Computational Investigation of the Effect of Various Spike Geometries Mounted on Supersonic Vehicles”, 1st International Conference on Modern Research in Aerospace Engineering (MRAE Published in -2016), 22-23 September, 2016, India.
  • Anupam Tiwari, Jayanta Sinha, Vishakha Baghel, Gouresh Sood, and Aayushi Agrawal, “Magnetic Analysis of an Electromagnetic Band Brake (EMBB),” 1st International Conference on Modern Research in Aerospace Engineering (MRAE Published in -2016), 22-23 September, 2016, India.
  • U. Vamsikrishna and Jayanta Sinha, “Experimental and Computational estimation of Aerodynamic Characteristics of a missile configuration”, National Conference on Wind Tunnel, Chennai, March 2017 (Paper Accepted for Oral Presentation).
  • Shubhrasmita Mandal, Krishna Maheta, Vivek Kumar and MS Prasad, Modern Research in aerospace engineering,MRAE Published in : Control of UAV using GSM technology, Sep 22-23, 2016,Noida,India.
  • Siddhant Khurana, Gopan Gopalan Achary, Saksham Arora and Jayanta Sinha, presented paper o“ Computational Analysis of Multi Row Disk Inlet”. First International Conference on Recent Advances in Aerospace Engineering (ICRAAE 2017), Deptt of Aerospace Engg, Karunaya University, Coimbatore, 3-4 March 2017
  • Swaraj Singh, Nitish Kumar Borah and Ankur Vats, “Advanced Rocket Propulsion Techniques for Deep Space Travel: A review”, Proceedings of International Conference on Infocom Technologies and Unmanned Systems with Conference, IEEE Xplore.
  • Nikhil Khanolkar, Nikita Shukla and Ankur Vats “Advanced Space Debris Removal Technique and Proposed Laser Ablation Technique: A Review Proceedings of International Conference on Infocom Technologies and Unmanned Systems with Conference, IEEE Xplore.
  • Om Veer Dhakad and Vivek Kumar, “A controller design using Fractional Order Sliding Mode for Quadcopter”, International Journal of Research in Advent Technology, Vol.6, No.2, February 2018 E-ISSN: 2321-9637.
  • Nikhil P. Khanolkar, Bharat Bhushan, M. Siddharth, Edwin Borrison, J. Sinha, “Analysis of Aerodynamic Characteristics of a Missile Configuration”, Proceedings of International Conference on Infocom Technologies and Unmanned Systems with Conference, IEEE Xplore, 2018.
  • Vishnu Kashyap, Navdeep Singh, Shivani Sharma and Jayanta Sinha, “Drag Reduction in Aerospace Vehicles using Aerospikes”, International Conference on Advances in Business and Engineering for Sustainability, Ghaziabad, UP, India, March 2018.
  • Jayanta Sinha, Neelakshi Kumar And Aaradhya Kaul, “Study of supersonic flow around tandem cavities”, International Journal of Mathematics Trend and Technology, Vol. 48, No.5, pp. 292-296.
  • Shrey Saxena , Navpreet Kaur and BASANT K. Agrawal : “A Review: Mechanical Properties of Glass Fiber Composites based on Manufacturing Techniques’, March 2018, ABES Eng. College Ghaziabad
  • Akanksha Talwar, Gaurav Lokhande, Ritesh Jain and Singh S., “Estimation of Aerodynamic Parameter using Cascade Forward Back Propagation,” IEEE 2nd International Conference on Telecommunication and Networks, Amity University Uttar Pradesh, Noida, India, Aug 2017.