FOLLOW

DEPARTMENT OF Mechanical Engineering

Home
About Us
Programmes
Life@ME
Events
People
Placement
Facilities
Alumni
Research & Innovation
Parent's Testimonial
Contact Us

Journals

Year: 2026

  1. Soni N.; Choudhury M.; Sikarwar B.S.; Liu D.; Rathore V.; Madan B.; Kumeria T.; Nayak R., Natural wax-assisted anisotropic crystallization on hierarchical polydimethylsiloxane sponge: Harnessing interfacial surface energy for efficient oil-water mixture and nanoemulsion separation, 2026, Journal of Colloid and Interface Science, 704, 139345.
  2. Joshi R.; Sikarwar B.S.; Rathore P.K.S., Dual Phase Change Material Segmentation and Orientation Effects in Shell-and-Tube Latent Heat Storage: A Validated CFD Simulation, 2026, Energy Technology, 14(1), e202501266.
  3. Pandey T.; Sharma S.; Rathore P.K.S.; Sikarwar B.S.; Sagade A.; Roy S., Comparative analysis of bamboo integrated with thermally adaptive materials for the development of energy-efficient building envelope in tropical climate, 2026, Applied Thermal Engineering, 292, 130282.
  4. Kataria S.; Sikarwar B.S.; Kumar R.; Muralidhar K., Influence of wettability design on moist air condensation: Superhydrophobic, unidirectional wettability gradient and patterned surfaces, 2026, International Communications in Heat and Mass Transfer, 175, 111017.
  5. Tyagi R.K.; Saksena Y., Design and development of catalytic converter for diesel engines using phase change materials, 2026, Physics and Chemistry of the Earth, 143, 104289.
  6. Nagpal Y.; Sharma R.; Sharma N.; Tyagi R.K., Investigation and evaluation of mechanical properties of AA2024/carbonised eggshell/SiC hybrid reinforced green AMC, 2026, International Journal of Materials Engineering Innovation, 17(2), 149-163.
  7. Ankita; Pandey R.S.; Tyagi R.K.; Dhaikar A.K., Whistler-mode waves with latitudinal variation drive by loss-cone beams and a parallel DC electric field in Jupiter’s magnetosphere, 2026, Astrophysics and Space Science, 371 (4), 39.
  8. Kumar R.; Phanden R.K.; Kumar P.; Kumar A., Analysis of roadblocks and enablers of net-zero in Indian manufacturing SMEs, 2026, Discover Sustainability, 7 (1), 112.
  9. Sharma A.; Shukla A.K.; Singh O.; Sharma M., Energy, exergy, exergoeconomic investigations, and working fluid selection of a solar-based energy generation system, 2026, Journal of Thermal Analysis and Calorimetry, 151(3), 2587-2601.
  10. Khandelwal N.; Sharma M.; Shukla A.K., Performance analysis of solar assisted thermal power cycle in integration with thermal storage systems, 2026, Energy Equipment and Systems, 14(1), 33-56.
  11. Subramonian S.; Kadirgama K.; Khalim Z.; Al-Obaidi A.; Pujari S.; Phanden R.K.; Kassim A.; Salleh S.; Vates U.; Ali A., Lights-Out Factory: Advancements, Challenges, and Prospects for Fully Autonomous Manufacturing, 2026, International Journal of Technology, 17(2), 537-564.
  12. Sharma S.; Vates U.K.; Singh S.; Mann V.S., Investigating the role of biodegradable dielectric fluids in micro-EDM precision for Inconel 718 alloy, 2026, Journal of Micromanufacturing,
  13. Chaudhary V.; Ahlawat C.; Mishra R.; Verma M.K.; Gupta P.; Senthamaraikannan P., Green synthesis and characterization of PLA-based bio-composites reinforced with cellulose fillers and fibers, 2026, Biomass Conversion and Biorefinery, 16 (1), 18.
  14. Faye G.W.; Kenea A.B.; Abdissa A.D.; Alemu K.N.; Sinha D.K.; Gupta G.; Workneh M., Investigation of the Impact Resistance of Metal–Polymer–Metal (MPM) Sandwich Laminates With Varying Core Thicknesses, 2026, Journal of Engineering (United Kingdom), 2026(1), 2063435.
  15. Girma Dimbushe M.; Jiru M.G.; Sinha D.K.; Gupta G.; Girma C.; Nedi K.D., Experimental investigation of copper matrix hybrid composite reinforced with Sic/Gr/Cr via stir casting, 2026, Discover Materials, 6 (1), 19.
  16. Gupta S.; Srivastava P.; Ansari H.; Mor R.; Prakash S.; Jagtap S., Driving circular economy: Key enablers for a sustainable meat supply chain in India, 2026, Journal of Agriculture and Food Research, 26, 102719.
  17. Pandey V.; Gupta S.; Kumar S.; Singh G.; Jagtap S., Driving digital transformation: unveiling the roadblocks for smes’ success in India, 2026, International Journal on Interactive Design and Manufacturing, 20 (4), 1831-1843.
  18. John A.; Verma V.K.; Gupta S.; Jagtap S., Enhancing perishable food supply chain resilience through digitalisation: A DEMATEL-based analysis of key disruptions and technological interventions, 2026, Journal of Agriculture and Food Research, 29, 103026.
  19. Pandey P.; Malik H.; Singh S.; Theng D.; Agrawal U.; Kumar R.; Balwani S.; Shukla A.K., Comparative Development of BioMedCLIP for Enhanced Biomedical Data Integration, 2026, Engineering, Technology and Applied Science Research, 16(1), 30978-30983.
  20. Chauhan A.S.; Tomar P.; Kumar A.; Shukla A.K., Design optimization and numerical investigation of thermal performance enhancement in an air-cooled engine cylinder with fins, 2026, Energy Equipment and Systems, 14 (2), 117-130.
  21. R G.; Kumar V.; D M.B.; Shukla A.K.; L G., Integrating Digital Twin Technology with AA7050 and AA5083 Alloys for Advanced Resistance Spot Welding Monitoring, 2026, Recent Patents on Mechanical Engineering, 19(2), 177-189.
  22. Jain A.; Dwivedi G.; Verma T.N.; Chaurasiya S.K.; Shukla A.K., Biohydrogen generation through dark fermentation of food waste and its application in dual fuel mode with Thevetia peruviana biodiesel, 2026, International Journal of Hydrogen Energy, 198, 152744.
  23. Alone A.; Pattanaik D.R.; Kumar P.; Shukla A.K., Coupled model based operational extended range forecast of temperature over India during winter season of 2020-2021, 2026, Mausam, 77(1), 283-300.
  24. Pachori H.; Choudhary T.; Sheorey T.; Shukla A.K., Experimental and numerical study of combined effect of PCM and artificial roughness on energy, exergy, and enviro-economic (4E) analysis of double pass solar air heaters, 2026, Thermal Science and Engineering Progress, 73, 104660.
  25. Chaudhary V.; Ahlawat C.; Dwivedi S.P.; Gupta P.; Subramonian S.; Senthamaraikannan P.; Avudaiappan S., Physical, mechanical and thermal analysis of banana/kenaf fiber with coconut/walnut shell filler based-PLA composites, 2026, Journal of Thermoplastic Composite Materials,
  26. Chaudhary V.; Prakash Pathariya M.S.; Ahlawat C.; B S.; Senthamaraikannan P.; Avudaiappan S., Valorization of agro-industrial residues for PLA-based biocomposites: Role of MAPP compatibilization in mechanical and thermal optimization, 2026, Journal of Thermoplastic Composite Materials,
  27. Chaudhary V.; Ahlawat C.; Sharma B.; Sahu R., Biodegradation and Characterization of 3-D Printed PLA-Based Polymer Composites Reinforced With Cellulose Based Hemp/Kenaf Fibers and Coconut/Walnut Fillers, 2026, Polymer Composites, 47(6), 5758-5768.
  28. Palanisamy S.; Packkirisamy V.; Subramonian S.; Avudaiappan S.; Chaudhary V.; Manikandan K.M., Development of sustainable PCL/rice husk–derived SiO2 composites through fused filament fabrication: Mechanical, degradation, and antibacterial performance, 2026, Journal of Thermoplastic Composite Materials,
  29. Chaudhary V.; Sahu R.; Ahlawat C.; Senthamaraikannan P.; Avudaiappan S.; Packkirisamy V.; Kumar R., Transforming plant and fruit waste into sustainable and eco-friendly bio composites: analysis of synthesis and dynamic performance with water absorption, 2026, Green Chemistry Letters and Reviews, 19(1), 2651577.
  30. Chaudhary V.; Ahlawat C.; Setiya S.; Sharma T.; Senthamaraikannan P., Melamine–formaldehyde self-healing microcapsules added sisal/hemp/abaca reinforced polymeric composites for mechanical and thermal explorations, 2026, Polymer Bulletin, 83(4), 205.
  31. Chaudhary V.; Ahlawat C.; Dwivedi S.P.; Palanisamy S.; Avudaiappan S.; Ramar K., Experimental investigation of fatigue, creep and tribological performance of aloe vera-, corn-, eucalyptus-, and soybean natural fiber-based bio composites, 2026, Polymers and Polymer Composites, 34
  32. Jamwal A.; Patidar A.; Gupta S.; Giallanza A., Intelligent PID-based control systems for adaptive and sustainable manufacturing, 2026, International Journal of System Assurance Engineering and Management,

Year: 2025

  1. Gupta, S.; Joshi, D.; Jamwal, A.; Bhanot, N.; Jagtap, S., Unveiling the synergy of sustainable manufacturing practices and lean for sustainable manufacturing competitiveness, 2025, Discover Applied Sciences.
  2. Gupta, S.; Joshi, D.; Jagtap, S.; Trollman, H.; Verma, V.K., Unveiling the role of stakeholder involvement for digital transformation of Indian food SMEs, 2025, Discover Food.
  3. Kumar, M.; Vipin; Agarwal, A.; Goyal, A.; Gupta, S., Unlocking the barriers to supply chain management in rail transport: a modified‑total interpretive structural modelling (M-TISM) approach, 2025, Journal of Infrastructure Preservation and Resilience.
  4. Agrawal, D.; Gupta, S.; Dusad, C.; Vishwakarma, A.; Meena, M.L.; Dangayach, G.S.; Jagtap, S., Unlocking circular economy: overcoming roadblocks to circular healthcare supply chain in Indian healthcare, 2025, Journal of Advances in Management Research, 22.0, 628, 651
  5. Dwivedi, S.P.; Chaudhary, V.; Sharma, S.; Sharma, S., Ultrasonic vibration effect in the development of Al/CCLW/alumina metal matrix composite to enhance mechanical properties, 2025, Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2383, 2394
  6. Rajpoot, A.S.; Agarwal, B.N.; Shukla, A.K.; Choudhary, T.; Pali, H.S., Thermal and environmental assessment of a diesel engine fuelled with karanja and linseed biodiesel: energy, exergy, emission, and sustainability analysis, 2025, Journal of Thermal Analysis and Calorimetry.
  7. Rajak, U.; Nashine, P.; Chaurasiya, P.K.; Nath Verma, T.N.; Dasore, A.; Pathak, K.K.; Dwivedi, G.; Shukla, A.K.; Saini, G., The effects on performance and emission characteristics of DI engine fuelled with CeO2 nanoparticles addition in diesel/tyre pyrolysis oil blends, 2025, Environment, Development and Sustainability, 27.0, 22635, 22662
  8. Pathariya, M.S.P.; Chaudhary, V.;Dwivedi, S.P.; Ahlawat, C., Synthesis and dynamic performance of biorefined PLA-based bio-composites reinforced with bio-fibers, 2025,Biomass Conversion and Biorefinery, 15.0, 20447, 20462
  9. Chaudhary, V.;Ahlawat, C.; Dwivedi, S.P.; Gupta, P.; Senthamaraikannan, P., Studies on thermal, mechanical, and surface properties of agro-waste fillers added with rattan palm and natural okra–based PLA composites, 2025, International Journal of Biological Macromolecules, 329.
  10. Seal, B.; Chaudhary, V.; Dey Sadhu, S.D., Studies on mechanical and water absorption behavior of biofiber-reinforced epoxy biocomposites added with seashell, eggshell, and coconut biofillers, 2025, Biomass Conversion and Biorefinery, 15.0, 13917, 13931
  11. Seal, B.; Chaudhary, V.; Dey Sadhu, S.D., Studies on fatigue, creep, and tribological performance of coconut shell, seashell, and eggshell filler-based bio-fiber-reinforced epoxy hybrid composites, 2025, Biomass Conversion and Biorefinery, 15.0, 14881, 14895
  12. Khan, A.; Chaudhary, V.; Dwivedi, S.P.; Dey Sadhu, S.D., Studies on evaluation of mechanical, thermal, and chemical properties of aloe vera-, corn-, eucalyptus-, and soybean fiber-reinforced epoxy biocomposites, 2025, Biomass Conversion and Biorefinery, 15.0, 10603, 10619.
  13. Sinha, A.A.; Choudhary, T.; Ansari, M.Z.; Shukla, A.K., Qualitative–quantitative comparative assessment of conventional gas turbine with fuel cell-based integrated power cycle, 2025, Environment, Development and Sustainability, 27.0, 7347, 7377
  14. Bhadu, J.; Bhamu, J.; Singh, D.; Kumar, P.; Garza-Reyes, J.A.; Phanden, R.K., Prioritizing industry 4.0 technologies (I4.0T) through an interpretive ranking process (IRP): a design and manufacturing perspective, 2025, International Journal on Interactive Design and Manufacturing, 19.0, 5203, 5220
  15. Sivaraos; K.A., Kadirgama, Kumaran Al; A.K., Zuhair, A. K.; M.S., Salleh, M. S.; U.K., Vatesh, U. K.; D., Ramasamy, D.; P., Satish, Pujari; M.A.M., Ali, M. A.M.; M.A.B., Kassim, Mohamed Abu Bakar, PREDICTIVE MODELLING AND OPTIMIZATION OF INNOVATIVE LASER CIRCULAR GROOVING FOR TITANIUM GRADE 2 USING RSM CENTRAL COMPOSITE DESIGN, 2025, Journal of Engineering Science and Technology, 20.0, 1525, 1542
  16. Kumar, L.; Goyal, A.; Garg, S.; Phanden, R.K., Predictive modeling of drilling machine performance for jute fiber-reinforced polymer composites using GA, TLBO, and GRA-based RSM approaches, 2025, International Journal on Interactive Design and Manufacturing, 19.0, 2265, 2281
  17. Alone, A.; Shukla, A.K.; Nandan, G.;Pattanaik, D.R., Predicting temperature variability in major Indian cities using Random Forest Regression (RFR) Model, 2025, Journal of Earth System Science, 134.
  18. Sharma, A.; Shukla, A.K.; SINGH, O.; Meeta, M., Performance evaluation of an organic Rankine cycle based novel trigeneration system for utilizing high temperature solar energy, 2025, Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 47.0, 6876, 6899
  19. Leliso B.; Sinha D.K.; Magami I.A.B.; Gupta G., Optimization of process parameters for synthesis of high entropy shape memory alloys using hybrid ANN-GA approach, 2025, International Journal of Information Technology (Singapore)
  20. Phanden, R.K.; Gupta, S.; Wolde, B.; Kumar, R.; Chakraborty, A., Optimisation of job shop scheduling problem using genetic algorithm and simulated annealing: a case study of manufacturing industry, 2025, International Journal of System Assurance Engineering and Management, 16.0, 883, 892
  21. ; Jiru, M.G.; Sinha, D.K.; Gupta, G.; Girma, C.; Nedi, K.D., Numerical simulation and parametric optimization of hot deformation behavior of copper-based composite material, 2025, Discover Mechanical Engineering, 4.
  22. P., Sharma, Bhupendra Prakash; S.S., Sharma, Shyam Sunder; A., Yadav, Ashu; R., Khatri, Rahul; M.P., Kumar, Manoj Pawan; K., Jaafar, K., Modeling the enablers of ergonomic design with Karakuri automation for special purpose machine manufacturing industry using the DEMATEL approach, 2025, Innovation and Emerging Technologies, 12.
  23. Kumar, S.R.; Sharma, A.; Patel, D.K., Mechanical characterization and thermal conductivity of nanosilica reinforced Al6061 based nanocomposite; Mechanische Charakterisierung und Wärmeleitfähigkeit von mit Nano-Siliziumdioxid verstärktem Nanoverbundwerkstoff auf Al6061-Basis, 2025, Materialwissenschaft und Werkstofftechnik, 56.0, 1183, 1190
  24. , Chhabra, Mayank; B.S., Saini, Balraj Singh; G., Dwivedi, Gaurav; A.K., Behura, Arun Kumar; A., Kumar, Anuj; S., Jain, Siddharth; A., Sarin, Amit; P.K., Verma, Puneet K., Investigation of the shelf life of the optimized Neem biodiesel and its execution and excretion characteristics on automotive diesel engine, 2025, Energy Sources, Part A: Recovery, Utilization and Environmental Effects, 47.0, 4750, 4772
  25. K., Sharma, Ratnesh Kumar; R.K., Das, Ranadip K.; S.R., Kumar, Shiv Ranjan; A., Sharma, Ajay, Investigating the Impact of Chromium and Titanium in Mechanical and Corrosion Properties of Iron Alloy Coating Materials Deposited via HVOF, 2025, Evergreen, 12.0, 1020, 1027
  26. Chaudhari, R.S.; Rane, S.B.; Mahajan S.K.; Phanden, R.K.; Mogal, Y.K., Integrated IoT-Blockchain architecture for sustainable green supply chains in agriculture equipment manufacturing industries: a TOPSIS approach, 2025, International Journal of Computer Integrated Manufacturing.
  27. Kumar, S.; Kumar, R.; Phanden, R.K.; Rathi, R., Implementing circular economy practices in Indian SMEs: analysis of challenges with case study, 2025, International Journal of Advanced Operations Management, 16.0, 35, 59
  28. Katre, S.; Baredar, P.; Dwivedi, G.; Shukla, A.K., Impact of hydrogen enrichment on the emission, combustion, and performance of dual-fuel engine fuelled with Karanja biodiesel, 2025, International Journal of Hydrogen Energy, 161.0.
  29. Dwivedi, G.; Jain, S.; Shukla, A.K.; Verma, P.; Nath Verma, T.N.; Saini, G., Impact analysis of biodiesel production parameters for different catalyst, 2025, Environment, Development and Sustainability, 27.0, 22563, 22583
  30. Agrawal, D.; Gupta, S.; Dusad, C.; Meena, M.L.; Dangayach, G.S.; Jagtap, S., Identifying enablers for a circular healthcare supply chain: An integrated fuzzy DEMATEL-MMDE approach with hesitant information, 2025, Cleaner Engineering and Technology, 24.
  31. Jain G.; Jain Y.; Sikarwar B.S.; Mukherjee M.; Chakrabarti S., Harnessing cotton fibril decorated ZIF-67 for bio-inspired all-weather sustainable photothermal desalination, 2025, Chemical Engineering Journal, 519.
  32. Jagtap, S.; Trollman, H.; Gupta, S.; Norrman, A., Guest editorial: Transforming food supply chains: harnessing the potential of the digital era, 2025, International Journal of Logistics Management, 36.0, 349, 353
  33. Rana, A.; Hooda, N.; Kumar, R.; Deswal, S.; Gahlot, P.; Phanden, R.K., Friction stir welding process parameters optimization and weld structure analyses to study mechanical characteristics using hybrid artificial intelligent soft computing techniques, 2025, International Journal on Interactive Design and Manufacturing, 19.0, 5039, 5065
  34. , Kataria, Smile; B.S., Sikarwar, B. S.; R., Kumar, Ranjit; S., Upadhyay, Sumant; D.G., Thakur, Dineshsingh G., Fabrication of fatty acid based superhydrophobic metallic surface functionalized with Al2O3 nanoparticles for moist air condensation, 2025, Chemical Physics Letters, 876.
  35. Dubey, A.K.; Dash, M.; Vasita, R.; Shukla, A.K.; Choudhary, T.; Nanda, H.S., Fabrication and Thermal Performance of Tailored Phase Change Microcapsules with Paraffin Core and Urea–Formaldehyde Shell for Thermal Energy Storage Applications, 2025, Energy Technology.
  36. Prasath, K.; Senthamaraikannan, P.; Sasidharan, I.; Chaudhary, V.; Balavairavan, B.; Indran, I., Extraction and characterization of cellulosic fiber extracted from Vitex negundo L. stem, 2025, International Journal of Biological Macromolecules, 319.
  37. Imran, N.; Kumar, M.; Jagtap, S.; Trollman, H.; Gupta, S.; Garcia-Garcia, G., Exploring consumer behaviour on carbon labelled food products: Evidence from a survey on the case of sandwich production and consumption in UK, 2025, Journal of Agriculture and Food Research, 21.
  38. Radhakrishnan, S.; Krishna, J.S.; Dwivedi, S.P.; Gupta, S.; Gupta, P.; Chaudhary, V., Experimental investigation of mechanical and physical properties of coconut shell and eggshell filler-based bio-fiber reinforced epoxy hybrid composites, 2025, Biomass Conversion and Biorefinery, 15.0, 3201, 3213
  39. Pimoli, D.S.; Tomar, P.; Ashwani, A.; Dwivedi, G.; Shukla, A.K., EXPERIMENTAL INVESTIGATION OF FRICTION FACTOR AND HEAT TRANSFER ENHANCEMENT USING CIRCULAR PERFORATED TWISTED TAPE INSERTS IN HEAT EXCHANGERS, 2025, International Journal of Energy for a Clean Environment, 26.0, 69, 84
  40. Sharma, A.; Shukla, A.K.; SINGH, O.; Meeta, M., Exergoeconomic, thermodynamic and working fluid selection analysis of a novel combined Brayton cycle-regenerative organic Rankine cycle for solar application, 2025, International Journal of Thermofluids, 26.
  41. Eggleston, A.; Sarfraz, S.; Salonitis, K.; Gupta, S.; Trollman, H.; Jagtap, S., Enhancing Safety Performance in UK Metal Manufacturing: A Revised Framework to Reduce Fatal Accidents, 2025, Safety, 11.
  42. Dwivedi, S.P.; Pachauri, P.; Sharma, S.; Chaudhary, V., Enhanced solid-state techniques: fabrication and characterization of aluminum–magnesium composites reinforced with ZrB2 particles, 2025, Sadhana - Academy Proceedings in Engineering Sciences, 50.
  43. Singh, K.; Dwivedi, G.; Nath Verma, T.N.; Shukla, A.K., Energy, exergy, emissions and sustainability assessment of hydrogen supplemented diesel dual fuel turbocharged common rail direct injection diesel engine, 2025, International Journal of Hydrogen Energy, 104. 378, 392
  44. Daniel N.A.; Kumar R.; Mathivathanan D.; Kaliyan M., Enabling sustainable manufacturing in Indian small and medium-sized enterprises: PRISMA and Delphi-based m-TISM approach, 2025, Journal of Advances in Management Research.
  45. C., Dubey, Mahesh C.; D., Mohanta, Dambarudhar; B.S., Sikarwar, B. S., Distinct partial and complete droplet bouncing states on (super) hydrophobic leaf surfaces with ultra-low- to high-adhesion textural features, 2025, Journal of Applied Physics, 138.
  46. Kumar, R.; Dutta, G.; Phanden, R.K., Digitalization Adoption Barriers in the Context of Sustainability and Operational Excellence: Implications for SMEs, 2025, EMJ – Engineering Management Journal, 37.0, 355, 371
  47. Parra-López, C.; Ben Abdallah, S.; Garcia-Garcia, G.; Hassoun, A.; Trollman, H.; Jagtap, S.; Gupta, S.; Aït-Kaddour, A.; Makmuang, S.; Carmona-Torres, C., Digital technologies for water use and management in agriculture: Recent applications and future outlook, 2025, Agricultural Water Management, 309.
  48. Chaudhary, V.; Radhakrishnan, S.; Das, P.P.; Dwivedi, S.P.; Mishra, S.; Gupta, P., Development and mechanical characterization of PLA composites reinforced with jute and nettle bio fibers, 2025, Biomass Conversion and Biorefinery, 15.0, 3443, 3455
  49. Prakash, K.S.J.; Kumar, K.K.; Sharma, V.K.; Chaurasiya, P.K.; Nath Verma, T.N.; Shukla, A.K.; Dwivedi, G., Design and analyses of an AB5 - metal hydride based canister for hydrogen compressor application, 2025, Process Safety and Environmental Protection, 194.0, 139, 151
  50. Al-Zohbi, G.; Kumar, A.; Kumar, A.; Kumar, P.; Phanden, R.K., Crafting a Sustainable Future: Exploring Research, Overcoming Challenges, and Anticipating Trends in Manufacturing and Design Engineering, 2025, Recent Patents on Mechanical Engineering, 18.0, 26, 40
  51. Deepak Kumar Yadav, Pushpendra Kumar Singh Rathore, Rajeev Kumar Singh, Arvind Kumar Gupta and Basant Singh Sikarwar, Comparative Analysis of 3-D Printed and Molded Shape-Stablized Phase Change Composites, 2025, Journal of Polymer and Composites, 13.0, 184, 192
  52. Mehta, J.; Ahlawat, C.; Tripathi, A.; Chaudhary, V.; Gupta, P., Cleaner Production Techniques for Developing Sustainable Polymeric Composites: Influencing Factors, Challenges and Future Applications, 2025, ECS Journal of Solid State Science and Technology, 14.
  53. Chaudhary, V.; Ahlawat, C.; Sharma, B.; Sahu, R., Biodegradation and Characterization of 3-D Printed PLA-Based Polymer Composites Reinforced With Cellulose Based Hemp/Kenaf Fibers and Coconut/Walnut Fillers, 2025, Polymer Composites.
  54. Sahu, S.K.; Sreekanth, P.S.; Sandiri, S.; Ravi Kumar, R.K.; Phanden, R.K.; Saxena, K.K.; Quanjin, Q., Assessment of mechanical properties by RVE modeling and simulation of recycled HDPE reinforced with carbon nanotubes, 2025, International Journal on Interactive Design and Manufacturing, 19.0, 2143, 2157
  55. Sivaraos; Phanden, R.K.; Lee, K.Y.S.; Abdullah, E.J.; Kadirgama, K.;Al-Obaidi, A.S.M.; Ramasamy, R., Artificial neural network for performance modelling of shape memory alloy, 2025, International Journal on Interactive Design and Manufacturing, 19.0, 6655, 6671
  56. Chaudhary, V.; Dwivedi, S.P.; Das, P.P.; Gupta, P.; Sharma, B., An investigation of fatigue, creep, and dynamic mechanical behavior of bio-fiber-reinforced PLA and their hybrid biocomposites, 2025, Biomass Conversion and Biorefinery, 15.0, 7623, 7633
  57. Kundu, A.; Ashwani, A.; Awasthi, M.K.; Dwivedi, G.; Shukla, A.K., AN EXPLORATIVE STUDY OF AN EARTH-AIR HEAT EXCHANGER FOR SUSTAINABLE BUILDING APPLICATIONS, 2025, International Journal of Energy for a Clean Environment, 26.0, 1, 22
  58. Kumar, A.; Gahlot, P.; Kumar, A.; Phanden, R.K., A state-of-the-art literature review on friction stir welding of 7075-aluminium alloy for tool geometry selection, environmental parameter and mathematical modelling perspective, 2025, International Journal on Interactive Design and Manufacturing, 19.0, 1549, 1562
  59. Kumar R.; Maurya A.; Sekar P.; Panigrahi S.K., A single step sustainable manufacturing technology and synergy map for producing high performance magnesium alloy sheets, 2025, Journal of Materials Processing Technology, 340.
  60. Japannavar, M.; Mussada, E.K.; Shukla, A.K., A numerical investigation of internal surface roughness and its influence on additively manufactured inlet manifold performance, 2025, Industrial Lubrication and Tribology.
  61. Sharma, P.; Ghatorha, K.S.; Cepova, L.; Mitra Ray, N.M.; Kumar, A.; Yadav, S.L.; Schindlerová, V.; Phanden, R.K., A hybrid FAHP–entropy–TOPSIS model for selecting the facility layout in small-scale manufacturing, 2025, Frontiers in Mechanical Engineering,11.
  62. Senthamaraikannan, P.; Saravanakumar, S.S.; Kanagaraj, A.; Indran, I.; Chaudhary, V., A comprehensive review of the characterization of raw and surface-modified cellulosic plant fibers and their polyester- and epoxy-based composites, 2025, International Journal of Biological Macromolecules, 318.
  63. Sharma, P.; Debnath, B.; Shukla, A.K.; Pawar, J.; Singh, G., A Comprehensive Review of Sensible Heat Thermal Energy Storage for High Temperature Applications, 2025, Energy Storage, 7.

Year: 2024 (Journal Articles)

  1. Alfarsi A., Sherif Z., Jagtap S., Gupta S., Salonitis K. 2024. Driving sustainability: assessing KPI effectiveness in the Saudi chemical industry. Discover Sustainability, 5, p.
  2. Ali S., Murtaza Q., Gupta P. 2024. Evaluation of phase, microstructural and mechanical characteristics in stir casted AA6351-Gr-TiC hybrid metal matrix composites. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 238, p.5097
  3. Awasthi D., Paswan M., Gupta P. 2024. Structural, Mechanical and Thermal Behaviour of Graphene-Epoxy Polymer Matrix Nanocomposites. ECS Journal of Solid State Science and Technology, 13, p.
  4. Awasthi D., Paswan M., Gupta P. 2024. Structural, Mechanical and Thermal Behaviour of MWCNT-PCS Hybrid Polymer Matrix Nanocomposites: An Extension Study of Graphene-Epoxy Polymer Matrix Nanocomposites. ECS Journal of Solid State Science and Technology, 13, p.
  5. Bhadu J., Bhamu J., Singh D., Kumar P., Garza-Reyes J.A., Phanden R.K. 2024. Prioritizing industry 4.0 technologies (I4.0T) through an interpretive ranking process (IRP): a design and manufacturing perspective. International Journal on Interactive Design and Manufacturing, , p.
  6. Bhutto Y.A., Pandey A.K., Saidur R., Rathore P.K.S., Samykano M. 2024. Hybrid silver-graphene nanoparticles enhanced Lauric Acid phase change material for photovoltaic and thermoelectric generator applications: Experimental and simulation analysis. Journal of Energy Storage, 93, p.
  7. Chaudhary V., Dwivedi S.P., Das P.P., Gupta P., Sharma B. 2024. An investigation of fatigue, creep, and dynamic mechanical behavior of bio-fiber-reinforced PLA and their hybrid biocomposites. Biomass Conversion and Biorefinery, , p.
  8. Chaurasiya P.K., Heeraman J., Singh S.K., Verma T.N., Dwivedi G., Shukla A.K. 2024. Exploring the combined influence of primary and secondary vortex flows on heat transfer enhancement and friction factor in a dimpled configuration twisted tape with double pipe heat exchanger using SiO2 nano fluid. International Journal of Thermofluids, 22, p.
  9. Chawla D., Nayak M., Gupta P. 2024. Investigating the Effect of Particle Sizes of SiC and Graphite on Strengthening of Aluminium Metal Matrix Composites. ECS Journal of Solid State Science and Technology, 13, p.
  10. Daniel N.A., Pathak A., Ravichandran P., Adith S.V., Kumar N. 2024. Analysing the role of Industry 4.0 in sustainable lean manufacturing. International Journal of Services and Operations Management, 48, p.62
  11. Daniel N.A., Sindhwani R., Kumar R., Mathiyazhagan K. 2024. Identifying the drivers and barriers for the implementation of sustainable manufacturing. International Journal of Logistics Systems and Management, 48, p.532
  12. Dewangan R., Sharma B., Sharma S. 2024. Investigation of hardness behavior in aluminum matrix composites reinforced with coconut shell ash and red mud using Taguchi analysis. Obrabotka Metallov, 26, p.179
  13. Dwivedi S.P., Chaudhary V., Sharma S. 2024. Effect of the Addition of Waste Glass Powder along with TiC as Reinforcement on Microstructure, Wettability, Mechanical and Tribological Behavior of AZ91D Magnesium Based Alloy. International Journal of Metalcasting, 18, p.1387
  14. Dwivedi S.P., Chaudhary V., Sharma S. 2024. Synergistic performance evaluation of copper–WC-graphene composites: Microstructure, mechanical properties, corrosion, and wear behavior under microwave sintering. Materials Chemistry and Physics, 317, p.
  15. Dwivedi S.P., Chaudhary V., Sharma S., Pattanaik A., Kumar P.V., Bisht Y.S., Singh V., Abbas M., Kozak D., Lozanovic J., Kumar A. 2024. Synthesis and purification of nano-sized titanium carbide particles through vacuum carbothermal reduction for enhanced mechanical, microstructural morphology, and tribological properties in friction stir processed A356-based aluminum composites. Journal of Materials Research and Technology, 33, p.5874
  16. Dwivedi S.P., Saxena K.K., Sharma S., Chaudhary V. 2024. Effect of Yttria-Stabilized Zirconia addition along with Cu in development of titanium based metal matrix composite via FSP technique for the application in biomedical devices. Composite Interfaces, 31, p.1173
  17. Gowthami D., Sharma R.K., Ansu A.K., Sarı A., Tyagi V.V., Rathore P.K.S. 2024. Evaluation of carbonized cotton stalk for development of novel form stable composite phase change materials for solar thermal energy storage. Process Safety and Environmental Protection, 188, p.1037
  18. Gowthami D., Sharma R.K., Tyagi V.V., Rathore P.K.S., Sarı A. 2024. Development of a novel form-stable phase change material based on alkali activated date seed biochar to harvest solar thermal energy. Journal of Energy Storage, 83, p.
  19. Grace Tetteh M., Gupta S., Kumar M., Trollman H., Salonitis K., Jagtap S. 2024. Pharma 4.0: A deep dive top management commitment to successful Lean 4.0 implementation in Ghanaian pharma manufacturing sector. Heliyon, 10, p.
  20. Gupta B., Jena J., Singla R. 2024. Propagation and interaction of waves in non-ideal magnetogasdynamics. Ricerche di Matematica, 73, p.2549
  21. Gupta K.K., Rathore P.K.S., Sikarwar B.S., Pandey A.K. 2024. Solar to thermal energy storage performance of composite phase change material supported by copper foam loaded with graphite and boron nitride. Solar Energy, 272, p.
  22. Gupta S., Jagtap S. 2024. Unlocking digital growth: overcoming barriers to digital transformation for Indian food SMEs. Discover Food, 4, p.
  23. Gupta S., Joshi D., Jagtap S., Trollman H., Haddad Y., Atescan Yuksek Y., Salonitis K., Raut R., Narkhede B. 2024. From failure to success: a framework for successful deployment of Industry 4.0 principles in the aerospace industry. International Journal of Industrial Engineering and Operations Management, 6, p.277
  24. Hai D.H., Nam V.Q., Samadhiya A., Kumar A., Gupta S., Jagtap S. 2024. Unravelling the economic impact of climate change in Vietnam's Mekong River Delta and Southeast region. Discover Sustainability, 5, p.
  25. Jain S., Sikarwar B.S., Muralidhar K. 2024. Improved Heat Transfer Modeling of Moist Air Condensation on Hydrophobic Metallic Surface. Heat Transfer Engineering, 45, p.1668
  26. Jha M.K., Das P.P., Pandey V., Gupta P., Chaudhary V., Gupta S. 2024. Water immersion aging of polymer composites: architectural change of reinforcement, mechanical, and morphological analysis. Biomass Conversion and Biorefinery, 14, p.15769
  27. Joshi D., Gupta S., Vishwakarma A., Jagtap S. 2024. Why IoT Enablement of Agrifood Transportation Disappoints Its Stakeholders: Unravelling Barriers for Enhanced Logistics. Journal of Food Quality, 2024, p.
  28. Kataria S., Sikarwar B.S., Rathore P.K.S., Upadhyay S., Muralidhar K. 2024. Metallic hydrophobic surfaces: Fabrication methods and applications in water vapor condensation. International Communications in Heat and Mass Transfer, 159, p.
  29. Kesharvani, S., Dwivedi, G., Verma, T.N., Chhabra, M. 2024. Optimization, production, and environmental sustainability of clean energy fuel utilizing reused cooking oil employing CaO catalysts. Sustainable Energy Technologies and Assessments, 63, p.
  30. Khan A., Chaudhary V., Dwivedi S.P., Sadhu S.D. 2024. Studies on evaluation of mechanical, thermal, and chemical properties of aloe vera-, corn-, eucalyptus-, and soybean fiber-reinforced epoxy biocomposites. Biomass Conversion and Biorefinery, , p.
  31. Khan O., Parvez M., Alhodaib A., Yahya Z., Ahamad T., Kumar Yadav A., Kumar Shukla A. 2024. Development and selection of lignocellulose biomass and nano-additive combination for co-pyrolysis operation in power generation using hybrid prediction and Machine learning model – A k-means cluster approach. Sustainable Energy Technologies and Assessments, 72, p.
  32. Khan O., Parvez M., Kumari P., Yahya Z., Alhodaib A., Yadav A., Shukla A. 2024. Optimization of Thermal Performance in Lauric Acid-Based Phase Change Materials Using a Priority Clustering Approach. Energy Storage, 6, p.
  33. Khandelwal N., Yadav P.S., Said Z., Sharma M., Shukla A.K., Singh O., Khandelwal D., Caliskan H. 2024. A Comprehensive analysis of energy, exergy, economic and environment on integrated solarcombined cycle with various HTFs and thermal storage. Applied Energy, 376, p.
  34. Kiran Sankar M.S., Gupta S., Luthra S., Jagtap S., Singh S., Kumar A. 2024. The emergence of digitalization to the manufacturing sector in the sustainability context: A multi-stakeholder perspective analysis. Journal of Cleaner Production, 468, p.
  35. Krishna J.S., Chaudhary V., Mehta J., Malhotra P., Gupta S., Gupta P. 2024. Synergistic reinforcement of nanofillers in biocomposites developed by additive manufacturing techniques. Biomass Conversion and Biorefinery, 14, p.13691
  36. Kumar A., Gahlot P., Kumar A., Phanden R.K. 2024. A state-of-the-art literature review on friction stir welding of 7075-aluminium alloy for tool geometry selection, environmental parameter and mathematical modelling perspective. International Journal on Interactive Design and Manufacturing, , p.
  37. Kumar L., Goyal A., Garg S., Phanden R.K. 2024. Predictive modeling of drilling machine performance for jute fiber-reinforced polymer composites using GA, TLBO, and GRA-based RSM approaches. International Journal on Interactive Design and Manufacturing, , p.
  38. Kumar R., Dutta G., Phanden R.K. 2024. Digitalization Adoption Barriers in the Context of Sustainability and Operational Excellence: Implications for SMEs. EMJ - Engineering Management Journal, , p.
  39. Kumar R., Rehman U.U., Phanden R.K. 2024. Strengthening the social performance of Indian SMEs in the digital era: a fuzzy DEMATEL analysis of enablers. TQM Journal, 36, p.139
  40. Kumar S., Kumar R., Phanden R.K., Kumar A., Bala J., Bharath Kumar S., Giri J., Sathish R.U., Agrawal A., Vishwanatha H.M. 2024. A study on critical failure factors for implementation of sustainable Lean Six Sigma from Indian manufacturing industries perspective using BWM technique. Frontiers in Mechanical Engineering, 10, p.
  41. Kumar S., Swarnakar V., Phanden R.K., Antony J., Jayaraman R., Khanduja D. 2024. Analyzing critical success factors of Lean Six Sigma for implementation in Indian manufacturing MSMEs using best-worst method. Benchmarking, 31, p.2960
  42. Kumar S., Swarnakar V., Phanden R.K., Khanduja D., Chakraborty A. 2024. Role of Lean Six Sigma in manufacturing setting: a systematic literature review and agenda for future research. TQM Journal, 36, p.1996
  43. Kumar S.R., Sharma A. 2024. Surface pre-reacted glass reinforced dental composite: Performance assessment of physicochemical, static mechanical, dynamic mechanical and wear properties. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 238, p.2973
  44. Lahmer E.B., Benhamou J., Admi Y., Moussaoui M.A., Mezrhab A., Phanden R.K. 2024. Evaluation of heat transfer rate of double-layered heat sink cooling system with high energy dissipation. Journal of Enhanced Heat Transfer, 31, p.19
  45. Lakkannavar V., Yogesha K.B., Prasad C.D., Phanden R.K., G S., Prasad S.C. 2024. Thermal spray coatings on high-temperature oxidation and corrosion applications – A comprehensive review. Results in Surfaces and Interfaces, 16, p.
  46. Manral A., Agarwal A.P., Ahmad F., Das P.P., Sharma B., Chaudhary V. 2024. Experimental investigation of tribology, interfacial temperature, surface roughness, and morphological analysis of bio-composites. Biomass Conversion and Biorefinery, 14, p.21783
  47. Manral A., Radhakrishnan S., Dwivedi S.P., Sharma B., Gupta P., Chaudhary V. 2024. Effect of water ageing on mechanical performance of Kenaf/PLA bio-composites. Biomass Conversion and Biorefinery, , p.
  48. Mehta J., Gupta K., Lavania S., Kumar P., Chaudhary V., Gupta P. 2024. Inherent roadmap in synthesis and applications of sustainable materials using oil based and microbial polymers. Materials Today Sustainability, 25, p.
  49. Pachori H., Choudhary T., Sheorey T., Kumar Shukla A., Verma V. 2024. A novel energy, exergy and sustainability analysis of a decentralized solar air heater integrated with V-shaped artificial roughness for solar thermal application. Sustainable Energy Technologies and Assessments, 66, p.
  50. Pandey R.S., Verma M.K., Tyagi R.K. 2024. Effect of electrostatic precipitator and turbulance creating devices on particulate matter. Reaction Kinetics, Mechanisms and Catalysis, 137, p.3059
  51. Pandey V., Kumar A., Gupta S. 2024. Assessing the need for the adoption of digitalization in Indian small and medium enterprises. Open Engineering, 14, p.
  52. Radhakrishnan S., Chaudhary V., Das P.P., Sharma B., Sharma R. 2024. Deterioration of polymer composites after water ageing of chemically treated and untreated biomass. Biomass Conversion and Biorefinery, 14, p.19985
  53. Radhakrishnan S., Das P.P., Alam A., Dwivedi S.P., Chaudhary V. 2024. Mechanical, thermal, and electrical properties of 2D nanomaterials for advanced applications. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 238, p.8739
  54. Radhakrishnan S., Das P.P., Chaudhary V. 2024. Deciphering the pathways for evaluation of nanofillers for polymer composites: biodegradability, sustainability, and emerging applications. Biomass Conversion and Biorefinery, 14, p.13659
  55. Radhakrishnan S., Dwivedi S.P., Sharma B., Gupta S., Gupta P., Chaudhary V. 2024. Deciphering the pathways for deployment of different architecture of chemically treated and untreated fibers in polymeric materials for performance enhancement. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 238, p.5752
  56. Radhakrishnan S., Khan A., Dwivedi S.P., Sharma B., Gupta S., Gupta P., Chaudhary V. 2024. Studies on mechanical, thermal, and water immersion of plant and animal wastage nanofiller–based bio-fiber-reinforced composites. Biomass Conversion and Biorefinery, 14, p.29591
  57. Radhakrishnan S., Mishra R., Dhyani V., Dwivedi S.P., Sadhu S.D., Gupta P., Chaudhary V. 2024. Studies on water uptake behavior and mechanical performance of bio-wastage-reinforced bio composites for improved sustainability. Biomass Conversion and Biorefinery, , p.
  58. Rajpoot A.S., Choudhary T., Chelladurai H., Shukla A.K., Sinha A.A. 2024. Comparative analysis of energy, exergy, emission, and sustainability aspects of third generation microalgae biodiesels in a diesel engine. Process Safety and Environmental Protection, 188, p.1026
  59. Rajpoot A.S., Choudhary T., Shukla A., Chelladurai H., Rajak U., Sinha A.A. 2024. Experimental investigation on behavior of a diesel engine with energy, exergy, and sustainability analysis using titanium oxide (TiO2) blended diesel and biodiesel. Journal of Enhanced Heat Transfer, 31, p.1
  60. Rana A., Hooda N., Kumar R., Deshwal S., Gahlot P., Phanden R.K. 2024. Friction stir welding process parameters optimization and weld structure analyses to study mechanical characteristics using hybrid artificial intelligent soft computing techniques. International Journal on Interactive Design and Manufacturing, , p.
  61. Rana S., Zahid H., Kumar R., Bharj R.S., Rathore P.K.S., Ali H.M. 2024. Lithium-ion battery thermal management system using MWCNT-based nanofluid flowing through parallel distributed channels: An experimental investigation. Journal of Energy Storage, 81, p.
  62. Rathore P.K.S., Patel B., Gupta M.K., Sikarwar B.S., Sharma R.K. 2024. Experimental analysis of thermal energy efficient clay brick incorporated with phase change material and insulation. Process Safety and Environmental Protection, 190, p.529
  63. Rathore P.K.S., Sikarwar B.S. 2024. Thermal energy storage using phase change material for solar thermal technologies: A sustainable and efficient approach. Solar Energy Materials and Solar Cells, 277, p.
  64. Reference
  65. Sahu S.K., Rama Sreekanth P.S., Devaraj S., V R.K., Phanden R.K., Saxena K.K., Ma Q. 2024. Assessment of mechanical properties by RVE modeling and simulation of recycled HDPE reinforced with carbon nanotubes. International Journal on Interactive Design and Manufacturing, , p.
  66. Sankar M.S K., Gupta S., Luthra S., Kumar A., Jagtap S., Samadhiya A. 2024. Empowering sustainable manufacturing: Unleashing digital innovation in spool fabrication industries. Heliyon, 10, p.
  67. Seal B., Chaudhary V., Sadhu S.D. 2024. Studies on fatigue, creep, and tribological performance of coconut shell, seashell, and eggshell filler-based bio-fiber-reinforced epoxy hybrid composites. Biomass Conversion and Biorefinery, , p.
  68. Seal B., Chaudhary V., Sadhu S.D. 2024. Studies on mechanical and water absorption behavior of biofiber-reinforced epoxy biocomposites added with seashell, eggshell, and coconut biofillers. Biomass Conversion and Biorefinery, , p.
  69. Sharma A., Kumar S.R. 2024. Optimum selection of nano-Al2O3, nano-SiO2, and nano-ZrO2 particulate fillers on physical, mechanical, and wear assessment of Al6061 nanocomposite using preference selection index. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, , p.
  70. Sharma A., Vishwakarma P.N., Gupta S., Dixit S., Kumar S.R. 2024. A comprehensive review to find capabilities of 4D printing in implantable medical devices [Ein umfassender Überblick über die Möglichkeiten des 4D-Drucks bei implantierbaren medizinischen Geräten]. Materialwissenschaft und Werkstofftechnik, 55, p.496
  71. Sharma B., Dewangan R., Sharma S. 2024. Characterizing the mechanical behavior of eco-friendly hybrid polymer composites with jute and Sida cordifolia fibers. Obrabotka Metallov, 26, p.267
  72. Sharma P., Singh Ghatorha K., Kang A.S., Cepova L., Kumar A., Phanden R.K. 2024. Strategic insights in manufacturing site selection: a multi-method approach using factor rating, analytic hierarchy process, and best worst method. Frontiers in Mechanical Engineering, 10, p.
  73. Sharma S., Nandan G., Tyagi R., Rohtagi P. 2024. Fabrication, testing, and microstructural analysis of nitinol-based self-healing metal matrix composite of A356 alloy cast by semi-solid metal processing. Advances in Materials and Processing Technologies, 10, p.3216
  74. Sharma S., Nandan G., Tyagi R.K. 2024. Microstructural characterization and analysis of nitinol-based self-healing metals matrix composite of A356 alloy produced by high-pressure die casting. Engineering Research Express, 6, p.
  75. Sharma, A., Vishwakarma, P.N., Gupta, S., Dixit, S., Kumar, S.R. 2024. A comprehensive review to find capabilities of 4D printing in implantable medical devices [Ein umfassender Überblick über die Möglichkeiten des 4D-Drucks bei implantierbaren medizinischen Geräten]. Materialwissenschaft und Werkstofftechnik, 55, p.496
  76. Shekhar S., Chaudhary V., Sharma B., Jain P., Kumar A., Bhagi A.K., Meena M.K. 2024. Bioinspired molecular modeling and antibacterial efficacy of silver/graphene oxide grafted chitosan nanocomposite for food packaging applications. Biomass Conversion and Biorefinery, 14, p.30091
  77. Singh A.K., Yadav G., Gupta P. 2024. Phase, Microstructure and Tensile Strength of Ultrasonically Stir Casted Al6061-TiC-Graphite Hybrid Metal Matrix Composites. Journal of Advanced Manufacturing Systems, 23, p.329
  78. Singh B.J., Sehgal R., Chakraborty A., Phanden R.K. 2024. Managing digital manufacturing transformation: assessing the status-quo and future prospects in North Indian industries. Journal of Strategy and Management, , p.
  79. Singh J., Gupta S., Jagtap S. 2024. Greening the future: identifying and mitigating environmental hotspots in the MSME sector - a wall mixer case study. International Journal of Sustainable Engineering, 17, p.35
  80. Singh J., Yadav A., Gupta S., Balu R., Shukla N., Singh G., Singh S. 2024. Design and computational analysis of continuous wave fiber laser cutting of flat and conformal ITO PET sheets. International Journal on Interactive Design and Manufacturing, , p.
  81. Singh K., Dwivedi G., Verma T.N., Shukla A.K. 2024. Energy, exergy, emissions and sustainability assessment of hydrogen supplemented diesel dual fuel turbocharged common rail direct injection diesel engine. International Journal of Hydrogen Energy, , p.
  82. Singh K., Verma T.N., Dwivedi G., Shukla A.K. 2024. Hydrogen production, storage, and CI Engine utilisation: A global perspective. Process Safety and Environmental Protection, 190, p.1067
  83. Singla R., Verschae R., Escaida S., Parthasarathy H. 2024. Estimating time-varying delays and parametric uncertainties in teleoperated robots. Nonlinear Dynamics, , p.
  84. Sinha A.A., Choudhary T., Shukla A.K., Ahmadi P. 2024. Thermo-economics, emissions, and sustainability comparison of a novel hybrid evaporative cooled solid oxide fuel cell-recuperated gas turbine with conventional system. Process Safety and Environmental Protection, 185, p.1189
  85. Sivarao S., Lee K.Y.S., Kumaran K., Ramasamy D., Kassim A.M., Salleh M.S., Vatesh U.K., Pujari S., Dharsyanth R. 2024. Advancements in additive manufacturing: innovations in direct ink writing materials and their transformative practical applications. Journal of Engineering Science and Technology, 19, p.246
  86. Srivastava P., Ansari H., Alrasheedi M., Sharma R., Prakash S., Gupta S. 2024. Leveraging supply chain collaboration with digital technologies for supply chain performance: an empirical investigation of Indian meat industries. International Journal of Food Science and Technology, 59, p.3514
  87. Sumit Sharma, Masum Bellah, Vaibhav Srivastava & Pradeep Rohatgi 2024. Gravity and Semisolid Casting of Self-Healing Aluminum Matrix Composites. International Journal of Metalcasting , 19, p.
  88. Sumit Sharma1 and Gopal Nandan2 2024. Casting and comprehensive analysis of nitinol-based self-healing metal matrix composite of A356 alloy prepared via clamp technique. Engineering Research Express, 6, p.
  89. Tetteh-Caesar M.G., Gupta S., Salonitis K., Jagtap S. 2024. Implementing Lean 4.0: a review of case studies in pharmaceutical industry transformation. Technological Sustainability, 3, p.354
  90. Thakur A., Vates U.K., Mishra S. 2024. Parametric optimization of 3D-printed PLA part using response surface methodology for mechanical properties. Smart Science, 12, p.91
  91. Thakur A., Vates U.K., Mishra S. 2024. Proof of concept study for radial compression strength & shape memory effect of 3D printed double arrowhead PLA stent. Emergent Materials, , p.
  92. Tiwari C., Dwivedi G., Verma T.N., Shukla A. 2024. Impact of machine learning approach using ann and rsm to evaluate the engine characteristics of a dual-fuel CI Engine. Journal of Enhanced Heat Transfer, 31, p.63
  93. Tomar P., Chauhan P., Kumar A., Shukla A.K., Macedo V.D.J., Mishra B.P., Lakkimsetty N.R., Manjunath T.C. 2024. Numerical Investigation of Thermal Performance Enhancement of Solar Reservoir using Flash Cycle. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 123, p.197
  94. Vishwakarma A., Dangayach G.S., Meena M.L., Gupta S., Joshi D., Jagtap S. 2024. Can circular healthcare economy be achieved through implementation of sustainable healthcare supply chain practices? Empirical evidence from Indian healthcare sector. Journal of Global Operations and Strategic Sourcing, 17, p.230
  95. Vishwakarma A., Mehrotra D., Agrahari R., Kharub M., Gupta S., Jagtap S. 2024. Breaking barriers: paving the path to sustainable fashion – insights for a greener apparel and textile sector. Journal of Advances in Management Research, 21, p.376
  96. Yadav D.K., Rathore P.K.S., Singh R.K., Gupta A.K., Sikarwar B.S. 2024. Experimental Study on Paraffin Wax and Soya Wax Supported by High-Density Polyethylene and Loaded with Nano-Additives for Thermal Energy Storage. Energies, 17, p.

Year - 2023

  1. Patel, B., Rathore, P.K.S., Gupta, N.K., Sikarwar, B.S., Sharma, R.K., Kumar, R. and Pandey, A.K., 2023. Location optimization of phase change material for thermal energy storage in concrete block for development of energy efficient buildings. Renewable Energy, 218, p.119306.
  1. Sikarwar, B. S. (2023). VISUALIZATION OF DROPWISE CONDENSATION OF WATER VAPOR FROM EXPERIMENTS AND SIMULATION. Journal of Flow Visualization and Image Processing, 30(25). https://doi.org/10.1615/JFlowVisImageProc.2022045741
  2. Jacso, A., Lado, Z., Phanden, R. K., Sikarwar, B. S., & Singh, R. K. (2023). Bézier curve-based trochoidal tool path optimization using stochastic hill climbing algorithm. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2022.12.056
  3. Kumar, S., Swarnakar, V., Phanden, R. K., Khanduja, D., & Chakraborty, A. (2023). Role of Lean Six Sigma in manufacturing setting: a systematic literature review and agenda for future research. TQM Journal. https://doi.org/10.1108/TQM-12-2022-0338
  4. Sinha, A. A., Sanjay, Ansari, M. Z., Shukla, A. K., & Choudhary, T. (2023). Comprehensive review on integration strategies and numerical modeling of fuel cell hybrid system for power & heat production. International Journal of Hydrogen Energy. https://doi.org/10.1016/j.ijhydene.2023.05.097
  5. Kumar, S., Phanden, R. K., Kumar, S. B., & Kumar, R. (2023). A state-of-the-art literature review on Lean Six Sigma from manufacturing sustainability and Industry 4.0 viewpoints. International Journal of Internet Manufacturing and Services, 9(02-Mar), 317-340. https://doi.org/10.1504/IJIMS.2023.132774
  6. Jacso, A., Szalay, T., Sikarwar, B. S., Phanden, R. K., Singh, R. K., & Ramkumar, J. (2023). Investigation of conventional and ANN-based feed rate scheduling methods in trochoidal milling with cutting force and acceleration constraints. International Journal of Advanced Manufacturing Technology, 127(01-Feb), 487-506. https://doi.org/10.1007/s00170-023-11506-x
  7. Shekhar, S., Chaudhary, V., Sharma, B., Kumar, A., Bhagi, A. K., & Singh, K. P. (2023). Sustainable Polysaccharide Hydrogels Based on Dynamic Schiff Base Linkages as Versatile Building Blocks for Fabricating Advanced Functional Materials. Journal of Polymers and the Environment, 31(4), 1257-1278. https://doi.org/10.1007/s10924-022-02685-x
  8. Radhakrishnan, S., Chaudhary, V., Das, P. P., Sharma, B., & Sharma, R. (2023). Deterioration of polymer composites after water ageing of chemically treated and untreated biomass. Biomass Conversion and Biorefinery. https://doi.org/10.1007/s13399-023-04086-z
  9. C Jacso, A., Szalay, T., Sikarwar, B. S., Phanden, R. K., Singh, R. K., & Ramkumar, J. (2023). Investigation of conventional and ANN-based feed rate scheduling methods in trochoidal milling with cutting force and acceleration constraints. International Journal of Advanced Manufacturing Technology, 127(01-Feb), 487-506. https://doi.org/10.1007/s00170-023-11506-x
  10. Jacso, A., Lado, Z., Phanden, R. K., Sikarwar, B. S., & Singh, R. K. (2023). Bézier curve-based trochoidal tool path optimization using stochastic hill climbing algorithm. Materials Today: Proceedings, 78, 633-639. https://doi.org/10.1016/j.matpr.2022.12.056
  11. hhabra, M., Sharma, A., & Dwivedi, G. (2023). Surface pre-reacted glass reinforced dental composite: Performance assessment of physicochemical, static mechanical, dynamic mechanical and wear properties. Part E: Journal of Process Mechanical Engineering. https://doi.org/10.1177/09544089231169646
  12. Sharma, Ajay, Vishwakarma, P. N., Ratna, S., & Walia, U. (2023). DESIGN AND OPTIMIZATION OF PATH PLANNING BOT BASED ON RO. Journal of Data Acquisition and Processing (JD), 38(1), 190-207. https://doi.org/10.5281/zenodo.7628846
  13. Dhanker, G., Ratna, S., Sharma, A., & Vishwakarma, P. N. (2023). FABRICATION AND TESTING OF BABASSU FIBER (ATTALEA SPECIOSA) REINFORCED COMPOSIT. JOURNAL OF AERONAUTICAL MATERIALS, 43(1), 159-166. ISSN: 1005-5053
  14. Patel, B., Rathore, P. K. S., Gupta, N. K., Sikarwar, B. S., Sharma, R. K., Kumar, R., & Pandey, A. K. (2023). Location optimization of phase change material for thermal energy storage in concrete block for development of energy efficient buildings. Renewable Energy, 218. https://doi.org/10.1016/j.renene.2023.119306
  15. Sharma, S., Nandan, G., & Tyagi, R. K. (2023). Self-healing metal matrix composite of nitinol wire-reinforced A356 alloy matrix by stir casting technology. Engineering Research Express, 5(3). https://doi.org/10.1088/2631-8695/aceed3
  16. Sharma, S., Nandan, G., Tyagi, R., & Rohtagi, P. (2023). Fabrication, testing, and microstructural analysis of nitinol-based self-healing metal matrix composite of A356 alloy cast by semi-solid metal processing. Advances in Materials and Processing Technologies. https://doi.org/10.1080/2374068X.2023.2210932
  17. Nagpal, Y., Sharma, R., Sharma, N., & Tyagi, R. K. (2023). Fabrication of AA2024/SiC/eggshell reinforced hybrid green aluminium matrix composite by stir casting route. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2023.02.149
  18. Pradeepkumar Samgeetha, S., Maharaj, N., & Prakash Sharma, B. (2023). Modelling of the design process challenges in additive manufacturing using PROMETHEE. Materials Today: Proceedings, 78, 620-626. https://doi.org/10.1016/j.matpr.2022.11.480
  19. Singh, R., Sharma, A. K., & Sharma, A. K. (2023). Synthesis and Characterization of NiTiMDAg Nanocomposites for Orthopedic Applications. Journal of Materials Engineering and Performance. https://doi.org/10.1007/s11665-023-08135-6
  20. Sharma, A., Shukla, A. K., Singh, O., & Sharma, M. (2023). Parametric Analysis of the Solar-assisted Intercooled Gas Turbine and Organic Rankine Cycle for Waste Heat Recovery and Power Production. Distributed Generation and Alternative Energy Journal, 38(5), 1455-1476. https://doi.org/10.13052/dgaej2156-3306.3855
  21. Sharma, M., Singh, O., & Shukla, A. K. (2023). Performance Evaluation of Solar-assisted Trigeneration System in Thermo-environmental Perspective. Distributed Generation and Alternative Energy Journal, 38(1), 41-66. https://doi.org/10.13052/dgaej2156-3306.3813
  22. Lahkar, G., Baiju, H., Marwaha, D., & Daniel, N. A. (2023). Barriers to business growth in pharmaceutical SMEs - a sustainable perspective. International Journal of Productivity and Quality Management, 39(2), 137-170. https://doi.org/10.1504/ijpqm.2023.131290
  23. Kılıçaslan, E., Demir, H. I., Kökçam, A. H., Phanden, R. K., & Erden, C. (2023). Ant Colony optimization application in bottleneck station scheduling. Advanced Engineering Informatics, 56. https://doi.org/10.1016/j.aei.2023.101969
  24. Gupta, G., Mansoor Ahammed, M., & Shaikh, I. N. (2023). Greywater treatment by zero-valent iron-modified sand filters: Performance and modelling using artificial neural network. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2023.01.021
  25. Gaurav, G., Dangayach, G. S., Meena, M. L., Chaudhary, V., Gupta, S., & Jagtap, S. (2023). The Environmental Impacts of Bar Soap Production: Uncovering Sustainability Risks with LCA Analysis. Sustainability (Switzerland), 15(12). https://doi.org/10.3390/su15129287
  26. Gaurav, G., Singh, A. B., Khandelwal, C., Gupta, S., Kumar, S., Meena, M. L., & Dangayach, G. S. (2023). Global Development on LCA Research: A Bibliometric Analysis From 2010 to 2021. International Journal of Social Ecology and Sustainable Development, 14(1). https://doi.org/10.4018/IJSESD.327791
  27. Radhakrishnan, S., Khan, A., Dwivedi, S. P., Sharma, B., Gupta, S., Gupta, P., & Chaudhary, V. (2023). Studies on mechanical, thermal, and water immersion of plant and animal wastage nanofiller–based bio-fiber-reinforced composites. Biomass Conversion and Biorefinery. https://doi.org/10.1007/s13399-023-04788-4
  28. Jamwal, A., Agrawal, R., Sharma, M., Dangayach, G. S., & Gupta, S. (2023). Lean manufacturing implementation challenges: a case study of pharmaceutical industries in Himachal Pradesh (India). International Journal of Business and Systems Research, 17(4), 462-481. https://doi.org/10.1504/IJBSR.2023.131730
  29. Vishwakarma, A., Dangayach, G. S., Meena, M. L., Jindal, M. K., Gupta, S., & Jagtap, S. (2023). Modelling challenges of blockchain technology enabled healthcare sustainable supply chain management: a modified-total interpretive structural modelling approach. Operations Management Research. https://doi.org/10.1007/s12063-023-00386-9
  30. S. K.S., Gupta, S., Luthra, S., & Jagtap, S. (2023). Role of digitalized sustainable manufacturing in SME'S: A bibliometric analysis. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2023.02.234
  31. Chaudhary, V., Gupta, S., & Gupta, P. (2023). Environmental chemicals induced toxicity and behavioural aspects. Materials Today: Proceedings, 73, 286-289. https://doi.org/10.1016/j.matpr.2022.09.579
  32. Gaurav, G., Kumar, V., Singh, A. B., Gupta, S., Meena, M. L., Dangayach, G. S., & Jindal, M. K. (2023). Life cycle assessment of extraction of edible oil from mustard seeds: A case study of an oil industry. Materials Today: Proceedings. https://doi.org/10.1016/j.matpr.2023.01.055
  33. Rajpoot, A. S., Saini, G., Chelladurai, H. M., Shukla, A. K., & Choudhary, T. (2023). Comparative combustion, emission, and performance analysis of a diesel engine using carbon nanotube (CNT) blended with three different generations of biodiesel. Environmental Science and Pollution Research. https://doi.org/10.1007/s11356-023-28965-0
  34. Sinha, A. A., Choudhary, T., Ansari, M. Z., Shukla, A. K., & Arabkoohsar, A. (2023). Waste heat recovery and exergy-based comparison of a conventional and a novel fuel cell integrated gas turbine hybrid configuration. Sustainable Energy Technologies and Assessments, 57. https://doi.org/10.1016/j.seta.2023.103256
  35. Sinha, A. A., Sanjay, Ansari, M. Z., Kumar Shukla, A., Verma, T. N., & Choudhary, T. (2023). Thermodynamic assessment of biomass-fueled solid oxide fuel cell integrated gas turbine hybrid configuration. Sustainable Energy Technologies and Assessments, 57. https://doi.org/10.1016/j.seta.2023.103242
  36. Lal, M., Thakur, P., Thakur, P., Sharma, N., Sharma, P., & Shukla, A. K. (2023). Rietveld refined structural, dielectric, and impedance properties of lead-free 1−x(K0.4Na0.6Nb0.96Sb0.04O3)-x(Bi0.5K0.5TiO3) (0.00 ≤ x ≤ 0.07) composites. Journal of Materials Science: Materials in Electronics, 34(15). https://doi.org/10.1007/s10854-023-10580-x
  37. Rathore, M. K., Agrawal, M., Baredar, P., Shukla, A. K., Dwivedi, G., & Verma, P. (2023). Fabrication and Performance Analysis of the Aero-Leaf Savonius Wind Turbine Tree. Energies, 16(7). https://doi.org/10.3390/en16073015
  38. Sinha, A. A., Saini, G., Sanjay, Shukla, A. K., Ansari, M. Z., Dwivedi, G., & Choudhary, T. (2023). A novel comparison of energy-exergy, and sustainability analysis for biomass-fueled solid oxide fuel cell integrated gas turbine hybrid configuration. Energy Conversion and Management, 283. https://doi.org/10.1016/j.enconman.2023.116923
  39. Sharma, S., Nandan, G., Rohatgi, P. K., & Tyagi, R. K. (2023). Fabrication, testing, and microstructural analysis of nitinol-based self-healing metal matrix composite of A356 alloy cast by semi-solid metal processing. Advances in Materials and Processing Technologies, 2374-068X, 220-228. https://doi.org/10.1080/2374068X.2023.2210932
  40. Ali, S., Murtaza, Q., & Gupta, P. (2023). Synergetic Effect of Gr-B4C Reinforcement on the Structural and Mechanical Properties of AA6351 Hybrid Metal Matrix Composites. ECS Journal of Solid State Science and Technology, 12(6). https://doi.org/10.1149/2162-8777/acd80d
  41. Singh, A. K., Yadav, G., & Gupta, P. (2023). Correlation of Structural and Mechanical Properties for Ultrasonically Stir Casted Al6061 Reinforced SiC-AlN Hybrid Metal Matrix Composites. ECS Journal of Solid State Science and Technology, 12(5). https://doi.org/10.1149/2162-8777/acd3ac
  42. Kumar, V., Yadav, G., & Gupta, P. (2023). Structural and Mechanical Behavior of Copper-TiC-Graphite Hybrid Metal Matrix Composites Fabricated by Microwave Sintering Technique. ECS Journal of Solid State Science and Technology, 12(4). https://doi.org/10.1149/2162-8777/acca48
  43. Lavania, S., Mehta, J., Bhardwaj, P., Tripathi, A., Gupta, N., & Gupta, P. (2023). Biocomposites: Prospects and Manifold Applications for Human and Environmental Sustainability. ECS Journal of Solid State Science and Technology, 12(3). https://doi.org/10.1149/2162-8777/acbe17
  44. Kumar, V., Yadav, G., & Gupta, P. (2023). Microstructure and Wear Analysis of Copper-Graphite-Titanium Carbide Hybrid Metal Matrix Composites Fabricated by Powder Metallurgy (P/M) Technique. ECS Journal of Solid State Science and Technology, 12(3). https://doi.org/10.1149/2162-8777/acbdbd
  45. Sisodia, R., Jerry, K., Pratim Das, P., Gupta, P., Gupta, S., & Chaudhary, V. (2023). Experimental study on the mechanical behaviour of linen/epoxy and linen/hemp/epoxy hybrid polymer composite. Materials Today: Proceedings, 78, 372-377. https://doi.org/10.1016/j.matpr.2022.10.176
  46. Chaudhary, V., Pratim Das, P., Sahu, R., Dey Sadhu, S., Gupta, P., & Gupta, S. (2023). Engineered nanomaterials for environmental sustainability: A lab-to-market perspective. Materials Today: Proceedings, 73, 302-306. https://doi.org/10.1016/j.matpr.2022.10.211
  47. Kesharvani, S., Chhabra, M., Dwivedi, G., Verma, T. N., & Pugazhendhi, A. (2023). Execution and emission characteristics of an automotive compression ignition engine powered by cerium oxide nanoparticles doped water diesel emulsion fuel. Fuel, 349. https://doi.org/10.1016/j.fuel.2023.128670
  48. Yadav, K., Yadav, V., Margekar, S. L., Bansal, P., Aggarwal, R., Gupta, A., & Ghotekar, L. H. (2023). Iron Deficiency Anemia as a Potential Risk Factor for Unprovoked DVT in Young Patients: A Case Series. Journal of Association of Physicians of India, 71(2), 86-88. https://doi.org/10.5005/japi-11001-0169
  49. Dwivedi, S. P., Chaudhary, V., Sharma, S., & Sharma, S. (2023). Ultrasonic vibration effect in the development of Al/CCLW/alumina metal matrix composite to enhance mechanical properties. Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering. https://doi.org/10.1177/09544089231200467
  50. Dwivedi, S. P., Chaudhary, V., Sharma, S. (2023). Effect of the Addition of Waste Glass Powder along with TiC as Reinforcement on Microstructure, Wettability, Mechanical and Tribological Behavior of AZ91D Magnesium Based Alloy. International Journal of Metalcasting. https://doi.org/10.1007/s40962-023-01117-3
  51. Manral, A., Agarwal, A. P., Ahmad, F., Das, P. P., Sharma, B., & Chaudhary, V. (2023). Experimental investigation of tribology, interfacial temperature, surface roughness, and morphological analysis of bio-composites. Biomass Conversion and Biorefinery. https://doi.org/10.1007/s13399-023-04430-3
  52. Manral, A., Singh, R., Ahmad, F., Das, P. P., Chaudhary, V., Joshi, R., & Srivastava, P. (2023). Multi-objective optimization of mechanical properties of chemically treated bio-based composites using response surface methodology. Composites Part C: Open Access, 10. https://doi.org/10.1016/j.jcomc.2022.100337

Year - 2022

  1. Jyoti, P., Singh, S. B., Basant, A. K., & Rajesh, K. (2022). THERMO-HYDRODYNAMIC ANALYSIS OF SATURATED WATER EVAPORATION THROUGH RECTANGULAR POROUS DUCT AT VARIOUS FLOW CONDITIONS. Journal of Enhanced Heat Transfer, 29(6), 41-59. DOI: 1615/JEnhHeatTransf.2022041554
  2. Lata Singh, P., Singh Sikarwar, B., Ranjan, M., & Muralidhar, K. (2022). Enhancing dropwise condensation of vapor from moist air over a copper substrate by temperature-controlled chemical etching. Thermal Science and Engineering Progress, 34. DOI: 1016/j.tsep.2022.101403
  3. Jacso, A., Sikarwar, B. S., Phanden, R. K., Singh, R. K., Ramkumar, J., & Sahu, G. N. (2022). Optimisation of tool path shape in trochoidal milling using B-spline curves. International Journal of Advanced Manufacturing Technology. DOI: 1007/s00170-022-09527-z
  4. Kanu, N. J., Bapat, S., Deodhar, H., Gupta, E., Singh, G. K., Vates, U. K., Verma, G. C., & Pandey, V. (2022). An Insight into Processing and Properties of Smart Carbon Nanotubes Reinforced Nanocomposites. Smart Science, 10(1), 40-55. DOI: 1080/23080477.2021.1972913
  5. Krishna, J. S., Chaudhary, V., Mehta, J., Malhotra, P., Gupta, S., & Gupta, P. (2022). Synergistic reinforcement of nanofillers in biocomposites developed by additive manufacturing techniques. Biomass Conversion and Biorefinery. DOI: 1007/s13399-022-03395-z
  6. Mehta, J., Das, P. P., Mehta, S., Chaudhary, V., Gupta, S., Gupta, N., Rinawa, M. L., & Gupta, P. (2022). Effect of nanofillers and nanotoxicity on the performance of composites: Influencing factors, future scope, challenges and applications. Polymer Composites, 43(6), 3335-3349. DOI: 1002/pc.26635
  7. Das, P. P., Chaudhary, V., Ahmad, F., Manral, A., Gupta, S., & Gupta, P. (2022). Acoustic performance of natural fiber reinforced polymer composites: Influencing factors, future scope, challenges, and applications. Polymer Composites, 43(3), 1221-1237. DOI: 1002/pc.26455
  8. Shekhar, S., Chaudhary, V., Sharma, B., Kumar, A., Bhagi, A. K., & Singh, K. P. (2022). Sustainable Polysaccharide Hydrogels Based on Dynamic Schiff Base Linkages as Versatile Building Blocks for Fabricating Advanced Functional Materials. Journal of Polymers and the Environment. DOI: 1007/s10924-022-02685-x
  9. Radhakrishnan, S., Das, P. P., & Chaudhary, V. (2022). Deciphering the pathways for the evaluation of nanofillers for polymer composites: biodegradability, sustainability, and emerging applications. Biomass Conversion and Biorefinery. DOI: 1007/s13399-022-03548-0
  10. Rinawa, M. L., Singh, K., Chaudhary, V., Ahamad, N., Das, P. P., Gupta, S., & Gupta, P. (2022). Optimization of tribological performance of plant fibers based polymer composites. Materials Today: Proceedings, 56, 2611-2617. DOI: 1016/j.matpr.2021.09.163
  11. Verma, J., Kumar, D., & Sikarwar, B. S. (2022). Fabrication of highly efficient nano core–shell structure for the development of super-hydrophobic polymeric coating on mild steel. Polymers and Polymer Composites, 30. DOI: 1177/09673911221087835
  12. Parkash, O., Kumar, A., & Sikarwar, B. S. (2022). Drag model validation of slurry pipeline using CFD. Journal of Engineering Research (Kuwait), 10(1B), 193-204. DOI: 36909/jer.8849
  13. Singh, P. L., & Sikarwar, B. S. (2022). Fabrication and analysis of hydrophobic mesh-metallic surface for moist air condensation. Advances in Materials and Processing Technologies. DOI: 1080/2374068X.2022.2036478
  14. Parkash, O., Kumar, A., & Sikarwar, B. S. (2022). CFD modeling of slurry flow erosion wear rate through mitre pipe bend. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. DOI: 1177/09544062211026353
  15. Bhandwal, M., & Tyagi, R. K. (2022). A new method to reduce the harmful gases and particulate matter emitted from the vehicles. Materials Today: Proceedings, 56, 3623-3626. DOI: 1016/j.matpr.2021.12.155
  16. Agarwal, A., Garg, S., Wassan, H., Joshi, P., & Tyagi, R. K. (2022). Investigation of mechanical behavior of carbon nanotube-reinforced magnesium composite. International Journal of Computational Materials Science and Engineering. DOI: https://doi.org/10.1142/S2047684122500166
  17. Bhandwal, M., & Tyagi, R. K. (2022). Disambiguation of Catalytic Converter with Fluid Compounds using Automation and Reducing Cold Start Time with PCM. Journal of Engineering Research (Kuwait), 10. DOI: 36909/jer.ICMET.17195
  18. Kumar, R., Sindhwani, R., & Singh, P. L. (2022). IIoT implementation challenges: analysis and mitigation by blockchain. Journal of Global Operations and Strategic Sourcing, 15(3), 363-379. DOI: 1108/JGOSS-08-2021-0056
  19. Kumar, R., Rehman, U. U., & Phanden, R. K. (2022). Strengthening the social performance of Indian SMEs in the digital era: a fuzzy DEMATEL analysis of enablers. TQM Journal. DOI: 1108/TQM-06-2022-0193
  20. Jacso, A., Sikarwar, B. S., Phanden, R. K., Singh, R. K., Ramkumar, J., & Sahu, G. N. (2022). Optimisation of tool path shape in trochoidal milling using B-spline curves. International Journal of Advanced Manufacturing Technology, 121(05-Jun), 3801-3816. DOI: 1007/s00170-022-09527-z
  21. Ahmad, Z., Shukla, A. K., Singh, V., Sharma, M., & Kumar, P. (2022). Thermodynamic analysis of solar powered trigeneration arrangement for cooling, power, and drinking water generation. Songklanakarin Journal of Science and Technology, 44(6), 1419-1426.
  22. Dosawada, P. S., Sharma, M., Shukla, A. K., & Choudhary, T. (2022). Review on the influence of nanomaterials on thermal energy storage methods. Materials Today: Proceedings. DOI: 1016/j.matpr.2022.11.472
  23. Khandelwal, N., Sharma, M., Singh, O., & Shukla, A. K. (2022). Comparative evaluation of Integrated Solar combined cycle plant with cascade thermal storage system for different heat transfer fluids. Journal of Cleaner Production, 353. DOI: 1016/j.jclepro.2022.131519
  24. Gonfa, B. K., Sinha, D., Vates, U. K., Badruddin, I. A., Hussien, M., Kamangar, S., Singh, G. K., Ahmed, G. M. S., Kanu, N. J., & Hossain, N. (2022). Investigation of Mechanical and Tribological Behaviors of Aluminum Based Hybrid Metal Matrix Composite and Multi-Objective Optimization. Materials, 15(16). DOI: 3390/ma15165607
  25. Chavan, S., Kanu, N. J., Shendokar, S., Narkhede, B., Sinha, M. K., Gupta, E., Singh, G. K., & Vates, U. K. (2022). An Insight into Nylon 6,6 Nanofibers Interleaved E-glass Fiber Reinforced Epoxy Composites. Journal of The Institution of Engineers (India): Series C. DOI: 1007/s40032-022-00882-0
  26. Sakhare, S. A., Pendkar, S. M., Kanu, N. J., Gupta, E., Vates, U. K., Singh, G. K., & Verma, G. C. (2022). Design suggestions on modified self-sustainable space toilet. SN Applied Sciences, 4(1). DOI: 1007/s42452-021-04878-w
  27. Vates, U. K., Sharma, B. P., Kanu, N. J., Gupta, E., & Singh, G. K. (2022). Modeling and Optimization of IoT Factors to Enhance Agile Manufacturing Strategy-based Production System Using SCM and RSM. Smart Science. DOI: 1080/23080477.2021.2017543
  28. Aman A., Bhardwaj R., Gahlot P., Kumar Phanden R. (2022). Selection of cutting tool for desired surface finish in milling Machine using Taguchi optimization methodology. Materials Today: Proceedings. DOI: 1016/j.matpr.2022.10.253
  29. Kumar R., Rehman U.U., Phanden R.K. (2022). Strengthening the social performance of Indian SMEs in the digital era: a fuzzy DEMATEL analysis of enablers. TQM Journal. DOI: 1108/TQM-06-2022-0193
  30. Gahlot P., Kaushik N., Hooda N., Rajkumar, Gupta S., Phanden R.K. (2022). Microstructural assessment of friction stir joined AA6063/10.5%Sic Al-matrix composite. Materials Today: Proceedings. DOI: 1016/j.matpr.2022.12.083
  31. Jacso A., Lado Z., Phanden R.K., Sikarwar B.S., Singh R.K. (2022). Bézier curve-based trochoidal tool path optimization using stochastic hill climbing algorithm. Materials Today: Proceedings. DOI: 1016/j.matpr.2022.12.056
  32. Phanden R.K., Aditya S.V., Sheokand A., Goyal K.K., Gahlot P., Jacso A. (2022). A state-of-the-art review on the implementation of digital twin in additive manufacturing to monitor and control parts quality. Materials Today: Proceedings, 88-93. DOI: 1016/j.matpr.2021.12.217
  33. Lahmer E.B., Benhamou J., Admi Y., Moussaoui M.A., Jami M., Mezrhab A., Phanden R.K. (2022). ASSESSMENT OF CONJUGATE AND CONVECTIVE HEAT TRANSFER PERFORMANCE OVER A PARTITIONED CHANNEL WITHIN BACKWARD-FACING STEP USING THE LATTICE BOLTZMANN METHOD. Journal of Enhanced Heat Transfer, 29(3), 51-77. DOI: 1615/JEnhHeatTransf.2022040357
  34. Verma M.K., Bansal V. (2022). CFD analysis of the earth air pipe heat exchanger with helical geometry for optimum space utilisation. International Journal of Ambient Energy. DOI: 1080/01430750.2022.2120907
  35. Dangayach G.S., Gaurav G., Gupta S. (2022). Environmental Impact Assessment of Captive Power Plant Using LCA for Sustainable Development. International Journal of Social Ecology and Sustainable Development, 13(1). DOI: 4018/IJSESD.290315
  36. Aggarwal A., Gupta S., Jamwal A., Agrawal R., Sharma M., Dangayach G.S. (2022). Adoption of smart and sustainable manufacturing practices: An exploratory study of Indian manufacturing companies. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 236(5), 586-602. DOI: 1177/09544054211040646
  37. Vishwakarma A., Dangayach G.S., Meena M.L., Gupta S. (2022). Analysing barriers of sustainable supply chain in apparel & textile sector: A hybrid ISM-MICMAC and DEMATEL approach. Cleaner Logistics and Supply Chain, 5. DOI: 1016/j.clscn.2022.100073
  38. Vishwakarma A., Dangayach G.S., Meena M.L., Gupta S., Joshi D., Jagtap S. (2022). Can circular healthcare economy be achieved through the implementation of sustainable healthcare supply chain practices? Empirical evidence from the Indian healthcare sector. Journal of Global Operations and Strategic Sourcing. DOI: 1108/JGOSS-07-2022-0084
  39. Sharma S., Singh N., Kumar D., Gupta S., Chaudhary V., Gupta N., Gupta P. (2022). Deformation Mechanism Studies by Varying Height to Diameter Ratio of Al-Mg and Al-Mg-C Metal Matrix Composites. Journal of Advanced Manufacturing Systems. DOI: 1142/S0219686723500270
  40. Jha M.K., Das P.P., Pandey V., Gupta P., Chaudhary V., Gupta S. (2022). Water immersion aging of polymer composites: architectural change of reinforcement, mechanical, and morphological analysis. Biomass Conversion and Biorefinery. DOI: 1007/s13399-022-03622-7
  41. Gupta S., Prathipati B., Dangayach G.S., Rao P.N., Jagtap S. (2022). Development of a Structural Model for the Adoption of Industry 4.0 Enabled Sustainable Operations for Operational Excellence. Sustainability (Switzerland), 14(17). DOI: 3390/su141711103
  42. Gupta P., Ahamad N., Kumar D., Gupta N., Chaudhary V., Gupta S., Khanna V., Chaudhary V. (2022). Synergetic Effect of CeO2 Doping on Structural and Tribological Behavior of Fe-Al2O3 Metal Matrix Nanocomposites. ECS Journal of Solid State Science and Technology, 11(11). DOI: 1149/2162-8777/ac9c92
  43. Sisodia R., Jerry K., Das P.P., Gupta P., Gupta S., Chaudhary V. (2022). Experimental study on the mechanical behavior of linen/epoxy and linen/hemp/epoxy hybrid polymer composite. Materials Today: Proceedings. DOI: 1016/j.matpr.2022.10.176
  44. Chaudhary V., Pratim Das P., Sahu R., Dey Sadhu S., Gupta P., Gupta S. (2022). Engineered nanomaterials for environmental Sustainability: A Lab-to-Market perspective. Materials Today: Proceedings. DOI: 1016/j.matpr.2022.10.211
  45. Vishwakarma A., Dangayach G.S., Meena M.L., Gupta S., Luthra S. (2022). Adoption of blockchain technology-enabled healthcare sustainable supply chain to improve healthcare supply chain performance. Management of Environmental Quality: An International Journal. DOI: 1108/MEQ-02-2022-0025
  46. Dagar N., Sharma R., Lal Rinawa M., Gupta S., Chaudhary V., Gupta P. (2022). Design and analysis of the piston using aluminum alloy and composites in Solidworks and Ansys. Materials Today: Proceedings, 67, 784-791. DOI: 1016/j.matpr.2022.07.318
  47. Gupta P., Ahamad N., Mehta J., Kumar D., Quraishi M.A., Rinawa M.L., Gupta S., Chaudhary V., Sadasivuni K.K. (2022). Corrosion, optimization and surface analysis of Fe-Al2O3-CeO2 metal matrix nanocomposites. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 236(8), 4346-4356. DOI: 1177/09544062211047844
  48. Jha M.K., Gupta S., Chaudhary V., Gupta P. (2022). Material selection for biomedical application in additive manufacturing using the TOPSIS approach. Materials Today: Proceedings, 62, 1452-1457. DOI: 1016/j.matpr.2022.01.423
  49. Lal Rinawa M., Singh K., Chaudhary V., Ahamad N., Das P.P., Gupta S., Gupta P. (2022). Simulation of bio-fiber-based polymer composites for frictional and specific wear rate. Materials Today: Proceedings, 56, 2640-2646. DOI: 1016/j.matpr.2021.09.184
  50. Das P.P., Manral A., Ahmad F., Sharma B., Chaudhary V., Gupta S., Gupta P. (2022). Environmentally sustainable chemical treatment of plant fibers for improved performance of polymeric composites. Polymer Composites. DOI: 1002/pc.26779
  51. Singh K., Rinawa M.L., Ahamad N., Chaudhary V., Das P.P., Gupta S., Gupta P. (2022). Optimization of tribological performance of natural fibers/epoxy composites using ANOVA & TOPSIS approach. Materials Today: Proceedings, 56, 2549-2555. DOI: 1016/j.matpr.2021.09.112
  52. Das P.P., Chaudhary V., Ahmad F., Manral A., Gupta S., Gupta P. (2022). Acoustic performance of natural fiber reinforced polymer composites: Influencing factors, future scope, challenges, and applications. Polymer Composites. DOI: 1002/pc.26455
  53. Sharma S.K., Mallick A., Singh D.B., Tiwari G.N. (2022). Experimental study of solar energy–based water purifier of single-slope type by incorporating a number of similar evacuated tubular collectors. Environmental Science and Pollution Research. DOI: 1007/s11356-021-16123-3
  54. Sinha A.A., Choudhary T., Ansari M.Z., Kumar Shukla A. (2022). Performance comparison and entropy generation of simple gas turbine with hybrid power cycle. Materials Today: Proceedings. DOI: 1016/j.matpr.2022.10.178
  55. Sinha A.A., Choudhary T., Ansari M.Z., Shukla A.K. (2022). Energy, exergy, and sustainability a novel comparison of conventional gas turbine with fuel cell integrated hybrid power cycle. International Journal of Hydrogen Energy. DOI: 1016/j.ijhydene.2022.07.268
  56. Rajak U., Nashine P., Chaurasiya P.K., Verma T.N., Dasore A., Pathak K.K., Dwivedi G., Shukla A.K., Saini G. (2022). The effects on performance and emission characteristics of DI engine fueled with CeO2 nanoparticles addition in diesel/tyre pyrolysis oil blends. Environment, Development and Sustainability. DOI: 1007/s10668-022-02358-8
  57. Dwivedi G., Jain S., Shukla A.K., Verma P., Verma T.N., Saini G. (2022). Impact analysis of biodiesel production parameters for different catalyst. Environment, Development and Sustainability. DOI: 1007/s10668-021-02073-w
  58. Das P.P., Manral A., Ahmad F., Sharma B., Chaudhary V., Gupta S., Gupta P. (2022). Environmentally sustainable chemical treatment of plant fibers for improved performance of polymeric composites. Polymer Composites, 43(10), 7155-7169. DOI: 1002/pc.26779
  59. Mittal P., Acharya V., Kumar S., Paswan M., Sadasivuni K.K., Gupta P. (2022). Synthesis and characterization of stir casted Cu-ZrO2-Graphite hybrid metal matrix composites for thermal management structures. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 236(14), 7927-7941. DOI: 1177/09544062221078197
  60. Mittal P., Paswan M., Gupta P. (2022). Synthesis and characterization of CNT-TiO2 reinforced copper matrix composites. Materials Today: Proceedings, 67, 736-741. DOI: 1016/j.matpr.2022.07.081
  61. Vishwakarma P.N., Mishra P., Sharma S.K. (2022). Characterization of a magnetorheological fluid damper: a review. Materials Today: Proceedings, 56, 2988-2994. DOI: 1016/j.matpr.2021.11.143
  62. Gupta B., Jena J., Singla R. (2022). Propagation and interaction of waves in non-ideal magnetogasdynamics. Ricerche di Matematica. DOI: 1007/s11587-022-00734-0
  63. Rana R., Singla R., Parthasarathy H. (2022). Robotic controller design for sporadic events using large deviations theory. Nonlinear Dynamics. DOI: 1007/s11071-022-07758-z
  64. Yadav, K., Kumar, N., Chaudhary, R. (2022). Effect of synthetic and aromatic amine antioxidants on oxidation stability, performance, and emission analysis of waste cooking oil biodiesel. Environmental Science and Pollution Research. DOI: 1007/s11356-021-18086-x
  65. Kumar N., Yadav K., Chaudhary R. (2022). ANN prediction approach analysis for performance and emission of antioxidant-treated waste cooking oil biodiesel. International Journal of Environmental Science and Technology. DOI: 1007/s13762-022-04660-4
  66. Seal B., Chaudhary V., Sadhu S.D. (2022). Development of natural fiber reinforced nanocomposites: Future Scope, challenges, and applications. Materials Today: Proceedings. DOI: 1016/j.matpr.2022.11.479
  67. Dagar N., Sharma R., Lal Rinawa M., Gupta S., Chaudhary V., Gupta P. (2022). Design and analysis of piston using aluminum alloy and composites in Solidworks and Ansys. Materials Today: Proceedings. DOI: 1016/j.matpr.2022.07.318
  68. Patel P., Chaudhary V. (2022). Delamination evaluation in drilling of composite materials – A review. Materials Today: Proceedings, 56, 2690-2695. DOI: 1016/j.matpr.2021.09.267

Year – 2021

  1. Achintya Sharma, Anoop Kumar Shukla, Onkar Singh, & Meeta Sharma. Recent Advances in Gas/Steam Power Cycles for Concentrating Solar Power. International Journal of Ambient Energy, (2021).https://doi.org/10.1080/01430750.2021.1919552
  2. Demir, H. I., Phanden, R. K., Kökçam, A., Erkayman, B., & Erden, C. Hybrid Evolutionary Strategy and Simulated Annealing Algorithms for Integrated Process Planning, Scheduling and Due-Date Assignment Problem. Academic Platform Journal of Engineering and Science, 9(1), 86-91.
  3. Agarwal, K.M., Tyagi, R.K., Saxena, V., Choubey, K.K., (2021) Mechanical behaviour of Aluminium Alloy AA6063 processed through ECAP with optimum die design parameters, Advances in Materials and Processing Technologies, DOI10.1080/2374068X.2021.1878705
  4. Aggarwal, A., Gupta, S., Jamwal, A., Agrawal, R., Sharma, M., & Dangayach, G. S. (2021). Adoption of smart and sustainable manufacturing practices: An exploratory study of Indian manufacturing companies. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 09544054211040646. DOI: 10.1177/09544054211040646.
  5. Ahamad, N., Mohammad, A., Rinawa, M.L., Sadasivuni, K. K. & Gupta, P. (2021). Correlation of Structural and Mechanical Properties for Al-Al2O3-SiC Hybrid Metal Matrix Composites, Journal of Composite Materials, 55(23), 3267-3280. DOI: 10.1177/00219983211011537
  6. Ahamad, N., Mohammad, A., Sadasivuni, K. K. & Gupta, P. (2021). Wear, Optimization and Surface Analysis of Al-Al2O3-TiO2 Hybrid Metal Matrix Composites, Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 235(1), 93-102. DOI: 10.1177/1350650120970432
  7. Chauhan, M.K., Garg, A., Syal, A., Singh, M. (2021). Testing of Material for Disc Brake Rotor.Advances in Engineering Materials, 37, 397-406. DOI: 10.1007/978-981-33-6029-7_37
  8. Chhabra, M., Saini, B. S.,Dwivedi, G., Behura, A.K., Kumar, A., Jain, S., Sarin, A., & Verma,P.(2021). Investigation of the shelf life of the optimized Neem biodiesel and its execution and excretion characteristics on automotive diesel engine. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, DOI: 1080/15567036.2021.1881658
  9. Chhabra, M.,Saini, B. S.,& Dwivedi, G. (2021). Impact assessment of biofuel from waste neem oil.  Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 43(24), 3381-3392, DOI: 1080/15567036.2019.1623946
  10. Das, P. P., Chaudhary, V., Ahmad, F., Manral, A., Gupta, S., & Gupta, P. (2021). Acoustic performance of natural fiber reinforced polymer composites: Influencing factors, future scope, challenges, and applications. Polymer Composites. DOI: 1002/pc.26455.
  11. Dutta, G., Kumar, R., Sindhwani, R. and Singh, R.K. (2021), “Digitalization priorities of quality control processes for SMEs: a conceptual study in perspective of Industry 4.0 adoption”, Journal of Intelligent Manufacturing, 32, 1679–698. https://doi.org/10.1007/s10845-021-01783-2 .
  12. Gupta G., Tyagi R.K. (2021) Theoretical analysis of plasma parameters on film deposition in planer and cylindrical magnetron sputtering, Indian Journal of Pure and Applied Physics, 59, 3, PP174-179.
  13. Gupta G., Tyagi R.K., Rajput S.K., (2021) A statistical analysis of sputtering parameters on superconducting properties of niobium thin film, Evergreen, 8, 1, PP 44.50, DOI10.5109/4372259
  14. Gupta, B., Singla, R. On singular surface theory to study steepening of waves in non-ideal magnetogasdynamics. Ricerche mat (2021). https://doi.org/10.1007/s11587-021-00675-0
  15. Gupta, Gaurav, & Tyagi, R. K. (2021). Theoretical Analysis of Plasma Parameters on Film Deposition in planer and Cylindrical Magnetron Sputtering. IJPAP Vol.59(03), 59, 174–179.
  16. Gupta, Gaurav, Tyagi, R. K., & Rajput, S. K. (2021). A statistical analysis of sputtering parameters on superconducting properties of niobium thin film. Evergreen, 8(1), 44–50. https://doi.org/10.5109/4372259
  17. Gupta, P., Ahamad, N., Mehta, J., Kumar, D., Quraishi, M. A., Rinawa, M. L., Gupta, S. & Sadasivuni, K. K. (2021). Corrosion, optimization and surface analysis of Fe-Al2O3-CeO2 metal matrix nanocomposites. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 09544062211047844. DOI: 1177/09544062211047844.
  18. Gupta, V. K., Kumar, H., Jha, A. K., Kumar, D., Sadasivuni & Gupta, P. (2021). Effect of Plain Strain Deformation on Grain strengthening mechanism of Fe-Al2O3Metal Matrix Nanocomposites, Journal of Composite Materials, 55(2), 291–302. DOI: 10.1177/0021998320948938
  19. Jamwal, A., Nayim, S. T. I., Shukla, R. K., Agrawal, R., & Gupta, S. (2021). Assessment of barriers in lead time improvement: an exploratory study of electronics manufacturing companies in Himachal Pradesh (India). International Journal of Business and Systems Research, 15(2), 182-199. DOI: 10.1504/IJBSR.2021.113422.
  20. Joshi P., Tyagi R.K., Agarwal K.M. (2021) Technological resources for fighting COVID-19 pandemic health issues, Journal of Industrial Integration and Management, 6, 2, PP 271-285, DOI10.1142/S2424862221500196
  21. Joshi Preeti, Tyagi RK, Agarwal KM. (2021). Technological resources for fighting COVID-19 pandemic health issues, Journal of Industrial Integration and Management, 6 (02), 271-285. DOI: 10.1142/S2424862221500196.
  22. Khushbu Yadav, Naveen Kumar, Rajiv Chaudhary. (2021). “Effect of synthetic and aromatic amine antioxidants on oxidation stability, performance, and emission analysis of waste cooking oil biodiesel” Environmental Science and Pollution Research, https://doi.org/10.1007/s11356-021-18086-x
  23. Krishnan, S., Gupta, S., Kaliyan, M., Kumar, V., & Garza-Reyes, J. A. (2021). Assessing the key enablers for Industry 4.0 adoption using MICMAC analysis: a case study. International Journal of Productivity and Performance Management. DOI: 10.1108/IJPPM-02-2020-0053.
  24. Malhotra, P., Singh, N.K., Tyagi, R.K., Sikarwar, B.S. (2021). Comparative study of rotary-EDM, gas assisted-EDM, and gas assisted powder mixed-EDM of the hybrid metal matrix composite. Advances in Materials and Processing Technologies. Volume 7, Issue 1, Pages 27 – 41. DOI 1080/2374068X.2020.1855398.
  25. Malhotra, P., Singh, N.K., Tyagi, R.K., Sikarwar, B.S. (2021). Comparative study of rotary-EDM, gas assisted-EDM, and gas assisted powder mixed-EDM of the hybrid metal matrix composite. Advances in Materials and Processing Technologies. Volume 7, Issue 1, Pages 27 – 41. DOI 1080/2374068X.2020.1855398.
  26. NandJeeKanu, Saurabh Bapat, Harshad Deodhar, Eva Gupta, Gyanendra Kumar Singh, Umesh Kumar Vates, Girish C. Verma & Vivek Pandey (2021): An Insight into Processing and Properties of Smart Carbon Nanotubes Reinforced Nanocomposites, Smart Science, DOI: 10.1080/23080477.2021.1972913.
  27. Neelam, K., Meeta, S., Onkar, S., & Kumar, S. A. (2021). Thermo-economic analysis of an integrated solar thermal cycle (ISTC) using thermal storage. Journal of Cleaner Production, 320, 128725.
  28. Neelam, Khandelwal, Meeta Sharma, Onkar Singh, Anoop Kumar Shukla. "Thermo-economic analysis of an integrated solar thermal cycle (ISTC) using thermal storage." Journal of Cleaner Production (2021): 128725. https://doi.org/10.1016/j.jclepro.2021.128725
  29. Panchal, D., Chatterjee, P., Sharma, R., & Garg, R. K. (2021). Sustainable oil selection for cleaner production in Indian foundry industries: A three phase integrated decision-making framework. Journal of Cleaner Production, 127827. DOI: 10.1016/j.jclepro.2021.127827
  30. Parkash, O., Kumar, A., Sikarwar, B.S. (2021) CFD Modeling Of Slurry Pipeline At Different Prandtl Numbers. Journal of Thermal Engineering. Volume 7, Issue 4, Pages 952 – 969. DOI 18186/thermal.930932.
  31. Parkash, O., kumar, A., Sikarwar, B.S. (2021). Computational Erosion Wear Model Validation of Particulate Flow Through Mitre Pipe Bend. Journal ofArabian Journal for Science and Engineering. Volume 46, Issue 12, Pages 12373 – 12390. DOI 1007/s13369-021-05931-x
  32. Pavithran, A., Sharma, M., & Shukla, A. K. (2021). Oxy-fuel Combustion Power Cycles: A Sustainable Way to Reduce Carbon Dioxide Emission. Distributed Generation & Alternative Energy Journal, 335-362.
  33. Pavithran, Anand, Meeta Sharma, and Anoop Kumar Shukla. "Oxy-fuel Combustion Power Cycles: A Sustainable Way to Reduce Carbon Dioxide Emission." Distributed Generation & Alternative Energy Journal (2021): 335-362. https://doi.org/10.13052/dgaej2156-3306.3641
  34. Prakash, J., Sikarwar, B.S., Agarwal, B.K. (2021) Flow and thermal field in sessile droplet evaporation at various environmental conditions. Heat Transfer. Volume 50, Issue 5, Pages 4535 – 4551.DOI 1002/htj.22087.
  35. Sivarao, Z. Jamaludin, M. S. Salleh, M. A. M. Ali, K. Kadirgama, U. K. Vatesh, S. Pujari, S. Sivakumar, S. Ramesh, K. Y. S. Lee. ‘Effects of sugarcane bagasse fibers on the mechanical behaviour of high density polyethylene’ Journal of Engineering Science and Technology, ISSN 1823-4690, Vol 16(5), 4214 - 4220, 2021.
  36. Samant, S., & Prakash, R. (2021). Achieving Lean through Value Stream Mapping with Constraint Programming and Simulation Technique for Complex Production Systems. International Journal of Industrial and Systems Engineering, 37(1), 119-148.DOI: 10.1504/IJISE.2021.112469
  37. Sharma A, Singholi AKS. Effect of nanosilica on shape memory and mechanical characterization of polylactic acid wood composite. Polymer Composites. 2021;1–9. https://doi.org/10.1002/pc. 25995
  38. Sharma, A. ,&Singholi, A. K. S., Shape memory and mechanical characterization of polylactic acid wood composite fabricated by fused filament fabrication 4D printing technology, Material science and Engineering Technology,https://doi.org/10.1002/mawe.202000284
  39. Sharma, A., Shukla, A. K., Singh, O., & Sharma, M. (2021). Recent advances in gas/steam power cycles for concentrating solar power. International Journal of Ambient Energy, 1-12.
  40. Sharma, D.K., Sikarwar, B.S., Upadhyay, S., (...), Srivastava, S.K., Muralidhar, K. (2021) Super-Hydrophobic Nanostructured Silica Coating on Aluminum Substrate for Moist Air Condensation. Journal of Materials Engineering and Performance. DOI 1007/s11665-021-06254-6
  41. Sharma, R., Kumar, V., Hira, J., & Kumar, R. (2021). Physiological and psycho–physiological approaches for maximal carrying load estimation. Engineering and Applied Science Research, 48(5), 537-546. DOI: 10.14456/EASR.2021.56.
  42. Sharma, S. K., Mallick, A., Singh, D. B., & Tiwari, G. N. (2021). Experimental study of solar energy-based water purifier (SEBWP) of single slope type by incorporating N number of series connected evacuated tubular collectors (ETCs). Environmental science and pollution research, Springer. https://doi.org/10.1007/s11356-021-16123-3
  43. Shreyash A. Sakhare,Sourabh M. Pendkar, NandJeeKanu, Eva Gupta, Umesh Kumar Vates, Gyanendra Kumar Singh & Girish C. Verma. “Design suggestions on Modified Self- sustainable Space Toilet” S N Applied Science, 4:13 (2021).
  44. Singh, P.L., Sikarwar, B.S. (2021) Modelling and analysis of factors affecting moist air condensation on mesh like surface for sustainable water harvesting. Journal of Engineering Research (Kuwait)Volume 9. DOI 36909/jer.ICCEMME.15779.
  45. Singh, P.L., Sikarwar, B.S. (2021). Parametric performance of condensation factors for extracting potable water from atmosphere. Evergreen. Volume 8, Issue 3, Pages 586 – 592. DOI 5109/4491650.
  46. Sivaraos, Zuhair, A.K., M.S. Salleh, M.A.M. Al, Kadirgama, U.K.Vates, Satish Pujari, L.D. Sivakumar. ‘Artificial Neural Network Predictive Modelling of Laser Micro Grooving for Commercial Pure Titanium (CP Ti) Grade 2’ Journal of Mechanical Engineering, ISSN 18235514, Vol 18(2), 217-234, 2021.
  47. Srivastava, P., Alrasheedi, M., Kaushik, Prabhakar. (2021). Reducing the cost of poor quality and improving process output by adopting a Six Sigma DMAIC tool: a case study. Int. J. Six Sigma and Competitive Advantage, Vol. 13( 1/2/3), 195-216
  48. Vates, U. K., Sharma, B. P., Kanu, N. J., Gupta, E., & Singh, G. K. (2021). Modeling and Optimization of IoT Factors to Enhance Agile Manufacturing Strategy-based Production System Using SCM and RSM. Smart Science, 1-16.
  49. Verma, Tikendra Nath, Pankaj Shrivastava, Upendra Rajak, Gaurav Dwivedi, Siddharth Jain, Ali Zare, Anoop Kumar Shukla, and Puneet Verma. "A comprehensive review of the influence of physicochemical properties of biodiesel on combustion characteristics, engine performance and emissions." Journal of Traffic and Transportation Engineering (English Edition) (2021) https://doi.org/10.1016/j.jtte.2021.04.006

Year – 2020

  1. Agarwal, K.M., Tyagi, R.K., Saxena, K.K. (2020) Deformation analysis of Al Alloy AA2024 through equal channel angular pressing for aircraft structures, Advances in Materials and Processing Technologies, DOI 10.1080/2374068X.2020.1834756
  2. Baghel, V., Sikarwar, B.S., Muralidhar, K. (2020) Dropwise condensation from moist air over a hydrophobic metallic substrate. Applied Thermal Engineering. Volume 181 DOI 1016/j.applthermaleng.2020.115733.
  3. Chhabra, M., Saini, B. S., &Dwivedi, G.  (2020). Optimization of the dual stage procedure of biodiesel synthesis from Neem oil using RSM based Box Behnken design. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, DOI: 1080/15567036.2020.1771480
  4. B. Singh, G. Bansal, H. Prasad, A. Mallick, Navneet Kumar, S. K. Sharma (2020), Sensitivity Analysis of N Undistinguishable PVT Compound-Parabolic-Concentrator-Collectors (Partly Covered, 50%) Integrated Single Slope Solar Distiller Unit, Journal of Solar Energy Engineering: ASME. (https://doi.org/10.1115/1.4048012)
  5. Dangayach, G. S., Gaurav, G., & Gupta, S. (2020). Development of footprint framework of performance measurement system for SMMOs. Journal of Advances in Management Research. DOI: 10.1108/JAMR-05-2020-0070.
  6. Dutta, G., Kumar, R., Sindhwani, R. and Singh, R.K.(2020),"Digital transformation priorities of India’s discrete manufacturing SMEs – a conceptual study in perspective of Industry 4.0", Competitiveness Review, Vol. 30 No. 3, pp. 289-314. https://doi.org/10.1108/CR-03-2019-0031.
  7. Eva Gupta, NandJeeKanu, Amartya Munot, Venkateshwersutar, Umesh Kumar Vates& Gyanendra Kumar Singh. “Stochastic and deterministic mathematical modelling and simulation to evaluate the Novel Covid-19 pandemic control measures” American journal of infectious diseases, 2020, 135-170.
  8. Hira, J., Sikarwar, B. S., Sharma, R., Kumar, V., & Sharma, P. (2020). Design and development of surge tank for NOx emission reduction in B20 biofueled diesel engine. International Journal of Vehicle Structures & Systems, 12(5), 494-497. DOI: 10.4273/ijvss.12.5.01
  9. Hira, J., Sikarwar, B.S., Sharma, R., Kumar, V., Sharma, P. (2020). Design and development of surge tank for nox emission reduction in b20 biofueled diesel engine. International Journal of Vehicle Structures and Systems. Volume 12, Issue 5, Pages 494 – 497. DOI 4273/IJVSS.12.5.01.
  10. Jamwal, A., Mittal, P., Agarwal, R., Gupta, S., Kumar, D., Sadasivuni, K. K. & Gupta, P. (2020). Towards Sustainable Copper Matrix Composites: Manufacturing Routes with Structural, Mechanical, Electrical and Corrosion Behaviour, Journal of Composite Materials, 54(19), 2635–2649. DOI: 10.1177/0021998319900655
  11. Jamwal, A., Mittal, P., Agrawal, R., Gupta, S., Kumar, D., Sadasivuni, K. K., & Gupta, P. (2020). Towards sustainable copper matrix composites: Manufacturing routes with structural, mechanical, electrical and corrosion behaviour. Journal of Composite Materials, 0021998319900655.
  12. Jamwal, A., Seth, P. P., Kumar, D., Agarwal, R., Sadasivuni, K. K. and Gupta, P. (2020). Microstructural, tribological and compression behavior of Copper matrix reinforced with Graphite-SiC hybrid composites, Materials Chemistry and Physics, 251, 123090. DOI: 10.1016/j.matchemphys.2020.123090
  13. Khandelwal, N., Sharma, M., Singh, O., & Shukla, A. K. (2020). Recent developments in integrated solar combined cycle power plants. Journal of Thermal Science, 29(2), 298-322.
  14. Kumar Shukla, A., Ahmad, Z., Sharma, M., Dwivedi, G., Nath Verma, T., Jain, S., ... &Zare, A. (2020). Advances of carbon capture and storage in coal-based power generating units in an Indian context. Energies, 13(16), 4124.
  15. Kumar, R., Singal, S. K., Dwivedi, G., & Shukla, A. K. (2020). Development of Maintenance Cost Correlation for High Head Run of River Small Hydro Power plant. International Journal of Ambient Energy, 1-38https://doi.org/10.1080/01430750.2020.1804447
  16. Kumar, R., Singh, R.K. and Dwivedi, Y.K. (2020), “Application of industry 4.0 technologies in SMEs for ethical and sustainable operations: Analysis of challenges”, Journal of Cleaner Production, 275, 124063. https://doi.org/10.1016/j.jclepro.2020.124063.
  17. Mahendra Kumar Verma, Vikas Bansal. (2020). A comparative CFD analysis of EAPHE System using different pipe design and varying velocities. International Journal of Advanced Science and Technology, 29(11s), 2754-2765.
  18. Malhotra, P., Singh, N.K., Tyagi, R.K., Sikarwar, B.S. (2020) Comparative study of rotary-EDM, gas assisted-EDM, and gas assisted powder mixed-EDM of the hybrid metal matrix composite, Advances in Materials and Processing Technologies, DOI10.1080/2374068X.2020.1855398
  19. Malhotra, P., Singh, N.K., Tyagi, R.K., Sikarwar, B.S. (2020). Comparative micro structural investigation of Al-SiC-Mg and Al-B4C-Mg particulate metal matrix composite. Annales de Chimie: Science des Materiaux. Volume 44, Issue 2, Pages 103 – 108. DOI 18280/acsm.440205.
  20. Malhotra, P., Singh, N.K., Tyagi, R.K., Sikarwar, B.S. (2020). Comparative micro structural investigation of Al-SiC-Mg and Al-B4C-Mg particulate metal matrix composite. Annales de Chimie: Science des Materiaux. Volume 44, Issue 2, Pages 103 – 108. DOI 18280/acsm.440205.
  21. Mittal, P., Paswan, M. K., Sadasivuni, K. K. & Gupta, P. (2020). Structural, Wear and Thermal Behaviour of Cu-Al2O3-Graphite Hybrid Metal Matrix Composites, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 234(8), 1154–1164. DOI: 10.1177/1464420720929377
  22. NandJeeKanu, Eva Gupta, Umesh Kumar Vates and Gyanendra Kumar Singh, Electrospinning process parameters optimization for biofunctional curcumin/gelatin nanofibers, Mater. Res. Express 7 (2020) 035022.
  23. Parkash, O., Kumar, A., Sikarwar, B.S.(2020). Numerical simulation and comparative analysis of pressure drop estimation in horizontal and vertical slurry pipeline. Journal of Mechanical Engineering and Sciences.Volume 14, Issue 2, Pages 6610 – 6624. DOI 15282/JMES.14.2.2020.06.0518.
  24. Pathak, V. K., Srivastava, A. K., & Gupta, S. (2020). Methodology for GD&T verification in an innovative benchmark part for contactless scanning systems. FME Transactions, 48(4), 899-907. DOI: 10.5937/fme2004899K.
  25. Ratna, S., & Kumar, B. (2020). Grey-AHP based supplier selection for sustainable supply chain in nickel plating industry. International Journal of Scientific and Technology Research, 9(4), 1971-1975.
  26. Rohit Singla, and Harish Parthasarathy, “Quantum robots perturbed by Levy processes: Stochastic analysis and simulations", Communications in Nonlinear Science and Numerical Simulation, Elsevier, Vol. 83, April 2020. https://doi.org/10.1016/j.cnsns.2019.105142
  27. S K Singh, B P Agrawal, B N Agrawal, KK Dubey, S K Sharma, RK Phanden (2020), Drag reduction of TVS Scooty using a windshield for the rider comfort improvement, International Journal of Vehicle Structures & Systems 12 (5), 498-502.
  28. Sahil sharma, Umesh Kumar Vates, Amit Bansal “Parametric Optimization of EN-31 Steel in Wire Cut Electro Discharge Machining by Taguchi Technique”. Advanced Science, Engineering and Medicine, Volume 12, Number 7, July 2020, pp. 881-887(7). https://doi.org/10.1166/asem.2020.2645
  29. Sahil sharma, Umesh Kumar Vates, Amit bansal“ Optimization of machining characteristics for EDM of different nickel based alloy by emboding of fuzzy grey relational and taguchi technique” world journal of engineering, emerald publishing Ltd, ISSN: 1708-5284.
  30. Sahil sharma, Umesh Kumar Vates, Amit bansal“ parametric optimization in die sinking EDM of Niminics 90 alloy using Taguchi based GRA approach” world journal of engineering, emerald publishing Ltd, ISSN: 1708-5284.
  31. Sajwan, K., Sharma, M., & Shukla, A. K. (2020). Performance Evaluation of Two Medium-Grade Power Generation Systems with CO2 Based Transcritical Rankine Cycle (CTRC). Distributed Generation & Alternative Energy Journal, Vol 35 (2) pp 111-138. https://doi.org/10.13052/dgaej2156-3306.3522
  32. Sajwan, K., Sharma, M., & Shukla, A. K. (2020). Performance Evaluation of Two Medium-Grade Power Generation Systems with CO2 Based Transcritical Rankine Cycle (CTRC). Distributed Generation & Alternative Energy Journal, 111-138.
  33. Sharma, D.K., Kumar, R., Avasthi, D.K., Sikarwar, B.S. (2020). Self Assembly of Super-hydrophobic Nanotextured Methyl Functionalized Silica on Copper and Aluminium Surfaces for Moist Air Condensation. Colloids and Surfaces A: Physicochemical and Engineering Aspects. Volume 605. DOI 1016/j.colsurfa.2020.125379.
  34. Sharma, M., & Singh, O. (2020). Exergo-economic study of a dual-pressure HRSG in gas/steam combined cycle plants. International Journal of Ambient Energy, 41(1), 50-57.
  35. Sharma, M., Shukla, A. K., Singh, A., Johri, S., & Singh, H. P. (2020). Parametric analysis of solar energy conversion system using parabolic concentrator and thermopile. International Journal of Ambient Energy, 41(12), 1409-1414.
  36. Sharma, S. K, A. Mallick, S. K. Gupta, Navneet Kumar, D.B. Singh and G.N. Tiwari (2020), Characteristic equation development for double slope solar distiller unit augmented with N identical parabolic concentrator integrated evacuated tubular collectors, Desalination and Water Treatment, DESWATER, Vol. 187, pp 178–194. https://doi.org/10.5004/dwt.2020.25394
  37. Sharma, S. K., Singh, D. B., Mallick, A., & Gupta, S. K. (2020). Energy metrics and efficiency analyses of double slope solar distiller unit augmented with n identical parabolic concentrator integrated evacuated tubular collectors: A comparative study. Desalination and Water Treatment, 195, 40–56. https://doi.org/10.5004/dwt.2020.25919
  38. Sharma, S. S., & Sharma, B. P. (2020). Modeling Of Lean Manufacturing Implementation Barriers: An Analytical Network Process Approach. Solid State Technology, 63(6), 9330-9343.
  39. Shukla, A. K., Ahmad, Z., Sharma, M., Dwivedi, G., Verma, T. N., Jain, S., ... &Zare, A. (2020). Advances of Carbon Capture and Storage in Coal-Based Power Generating Units in an Indian Context. Energies, 13(16), 1-17. https://doi.org/10.3390/en13164124
  40. Sikarwar, B.S., Sharma, R.C., Tyagi, R.K., Phanden, R.K.. (2020) Editorial forward for the special issue from the second international conference on future learning aspects of mechanical engineering. International Journal of Vehicle Structures and Systems. Volume 12, Issue 5, Pages 492 – 493. DOI 4273/IJVSS.12.5.00.
  41. Singh, P.L., Sikarwar, B.S. (2020). Condensation of Moist Air on Mesh-like Surfaces. Asian Journal of Water, Environment and Pollution. Volume 17, Issue 2, Pages 65 – 72. DOI 3233/AJW200022.
  42. Singh, R.K. and Kumar, R. (2020), "Strategic issues in supply chain management of Indian SMEs due to globalization: an empirical study", Benchmarking: An International Journal, Vol. 27 No.3, pp.913-932. https://doi.org/10.1108/BIJ-09-2019-0429.
  43. Singh, U., Lingwal, J., Rathore, A., Sharma, S., & Kaushik, V. (2020). Comparative analysis of different materials for piston and justification by simulation. Materials Today: Proceedings, 25, 925-930. DOI: https://doi.org/10.1016/j.matpr.2020.03.078
  44. Singholi, A. K. S., & Sharma, A. (2020). Review: Recent advancement and research possibilities in 4D printing technology. [Überblick: JüngsteFortschritte und Forschungsmöglichkeiten in der 4D Drucktechnologie] Materialwissenschaft Und Werkstofftechnik, 51(10), 1332-1340. doi:10.1002/mawe.202000008
  45. Sinha, M., Tyagi, R.K. (2020) Synthesis and characterisation of E-glass based composites with different fillers for defence automotive applications, International Journal of Microstructure and Materials Properties, 15, 3,PP 169-195 DOI10.1504/IJMMP.2020.110513
  46. Srivastava, P., Khanduja, D., & Agrawal, V. P. (2020). Agile maintenance attribute coding and evaluation based decision making in sugar manufacturing plant. OPSEARCH, 57(2), 553-583. doi:10.1007/s12597-019-00426-8.
  47. Srivastava, P., Khanduja, D., & Ganesan, S. (2020). Fuzzy methodology application for risk analysis of mechanical system in process industry. International Journal of Systems Assurance Engineering and Management, 11(2), 297-312. doi:10.1007/s13198-019-00857-y
  48. Tyagi, R.K., Singh, A., (2020) Increasing the Comfort of the Harianavi Bullocks by Reduction of Contact Pressure on Neck by Designing a Body Contoured Yoke, Journal of Applied Animal Welfare Science, 23,4, PP424-432 DOI: 10.1080/10888705.2019.1678037
  49. S. Gupta, D. B.Singh, S. K. Sharma, Navneet Kumar, T. S. Bhatti and G.N.Tiwari (2020), Modeling Self-Sustainable Fully-Covered Photovoltaic Thermal-Compound Parabolic Concentrators Connected to Double Slope Solar Distiller, Desalination and Water Treatment, DESWATER, Vol. 190, pp 12–27. (https://doi.org/10.5004/dwt.2020.25696)
  50. Verma, M , Bansal, V , Rana, K . (2020). Development of passive energy source as earth air pipe heat exchangers (EAPHE) system - A Review. Journal of Thermal Engineering ,6 (5) , 651-676 . DOI: 10.18186/thermal.790173
  51. Verma, M.K., Bansal, V. (2020) Comparative CFD analysis of helical shaped earth air pipe heat exchanger using water tube as a thermal reservoir using different pipe materials. International Journal of Renewable Energy Research 10(3), pp. 1334-1348.
  52. Vishal, D.,Dubey, S., Goyal, R.,Dwivedi, G.,Baredar, P., &Chhabra, M. (2020). Optimization of alkali-catalyzed transesterification of rubber oil for biodiesel production & its impact on engine performance. Renewable Energy, 167-180. DOI:10.1016/j.renene.2020.05.136.
  53. Yadav, S.S., Sikarwar, B.S., Ranjan, P., Janardhanan, R. (2020). Microfluidic system for screening disease based on physical properties of blood. BioImpacts. Volume 10, Issue 3, Pages 141 – 150. DOI 34172/bi.2020.18.
  54. Yadav, S.S., Sikarwar, B.S., Ranjan, P., Janardhanan, R., Goyal, A. (2020). Surface tension measurement of normal human blood samples by pendant drop method. Journal of Medical Engineering and Technology. Volume 44, Issue 5, Pages 227 – 236. DOI 1080/03091902.2020.1770348.

Year – 2019

  1. Abraham, A. S., Airi, R., & Ratna, S. (2019). GRA-FAHP model for supplier selection in a nickel plating industry: A hybrid MCDM approach. International Journal of Advanced Science and Technology, 28(16), 2034-2042.
  2. Anand Raj, Ravi Shankar, Anoop Kumar Shukla. Design and Fabrication of Wave Powered Generator. Journal of Energy, Environment & Carbon Credits. 2019; 9(1): 1–5p ISSN: 2249-8621
  3. Anoop Kumar Shukla, Achintya Sharma, Meeta Sharma & Gopal Nandan (2019) “Thermodynamic investigation of solar energy-based triple combined power cycle”, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 41:10, 1161-1179.
  4. Anoop Kumar Shukla, Meeta Sharma, Neelam Khandelwal, Onkar Singh (2019) "Recent Developments in Integrated Solar Combined Cycle Power Plants." Journal of Thermal Science 29, no. 2 (2020): 298-322.
  5. Baghel, V., Sharma, D.K., Sikarwar, B.S., Kumar, R., Avasthi, D.K. (2019). Tailoring the hydrophobicity of copper surface with ion beam irradiation. Radiation Effects and Defects in Solids. Volume 174, Issue 3-4, Pages 307 – 319. DOI 1080/10420150.2018.1564149.
  6. Baghel, V., Sikarwar, B.S., Muralidhar, K. (2019). Modeling of heat transfer through a liquid droplet. Heat and Mass Transfer/Waerme- und Stoffuebertragung. Volume 55, Issue 5, Pages 1371 – 1385. DOI 1007/s00231-018-2520-2.
  7. Chauhan, M.K., Dutta, S., Gandhi, B.K. (2019). Wake flow modification behind a square cylinder using control rods. Journal of Wind Engineering & Industrial Aerodynamics, 184, 342-361. DOI:10.1016/j.jweia.2018.12.002
  8. Chauhan, M.K.,Varun, (2019).Life cycle energy usage and GHG emissions study of sugar mill in India. Environmental Engineering and Management Journal, 18(1), 71-79.
  9. Gupta G., Tyagi R.K., (2019) An experimental evaluation of mechanical properties and microstructure change on thin-film-coated AISI-1020 steel, Materials Performance and Characterization, 8,3, DOI10.1520/MPC20180143
  10. Kannojiya R., Kumar R. (2019). Performance evaluation of absorption refrigeration systems using intelligent optimization techniques: A review. International Journal of Mechanical and Production Engineering Research and Development, 961-972.
  11. Kumar A., Govil K., Dwivedi G., Chhabra M. (2019). Problems Associated with Hydraulic Turbines. In: Yadav N., Yadav A., Bansal J., Deep K., Kim J. (eds) Harmony Search and Nature Inspired Optimization Algorithms. Advances in Intelligent Systems and Computing, vol 741. Springer, Singapore. DOI: 10.1007/978-981-13-0761-4_60
  12. Prakash, J., Sikarwar, B.S. (2019). Modeling of Sessile Droplet Evaporation on Engineered Surfaces. Journal of Thermal Science and Engineering Applications. Volume 11, Issue 6. DOI 1115/1.4043093.
  13. Ratna, S., & Kumar, B. (2019). Evaluating the green supply chain management barriers in a SME: An AHP approach. International Journal of Mechanical and Production Engineering Research and Development, 9(2), 271-276. doi:10.24247/ijmperdapr201926
  14. Ratna, S., Goswami, A., Anand, K., Rai, A. K., & Yadav, A. (2019). A hybrid mcdm model for supplier selection in supply chain. International Journal of Mechanical and Production Engineering Research and Development, 9(3), 143-150. doi:10.24247/ijmperdjun201915
  15. Rohit Singla, and Harish Parthasarathy, “Teleoperation of robots carrying current intensity via electromagnetic fields: A quantum mechanical analysis” Results in Physics, Elsevier, Vol. 14, Sep 2019. https://doi.org/10.1016/j.rinp.2019.102415
  16. Sharma, M., & Singh, O. (2019). Thermodynamic study of multi pressure HRSG in gas/steam combined cycle power plant. Journal of The Institution of Engineers (India): Series C, 100(2), 361-369.
  17. Sharma, P., Dabra, V., Sharma, S., Khanduja, D., Sharma, N., Sharma, R., & Saini, K. (2019). Microstructure and properties of AA6082/(SiC+ Graphite) hybrid composites. Refractories and Industrial Ceramics, 59(5), 471-477. DOI: 10.1007/s11148-019-00256-7
  18. Sharma, R., Kamboj, K., & Bhardwaj, J. (2019). Gender response and safe carrying load limit for sugar industry workers. International Journal of Occupational Safety and Ergonomics, 25(1), 51-60. DOI: 10.1080/10803548.2018.1503401
  19. Shukla, A. K., Sharma, A., Sharma, M., & Nandan, G. (2019). Thermodynamic investigation of solar energy-based triple combined power cycle. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 41(10), 1161-1179.
  20. Singholi, A. K. S., & Sharma, A. (2019). Finding capabilities of 4D printing. International Journal of Engineering and Advanced Technology, 8(5), 1095-1110.
  21. Sinha M., Tyagi R.K. (2019) Exploratory analysis of vehicular light weighting with the application of carpooling system vs. synthesis and utilisation of E-glass-based composites and its effects over emissions and energy saving in the city of Delhi, International Journal of Ambient Energy, DOI: 10.1080/01430750.2019.1573755
  22. Sinha M., Tyagi R.K. (2019) Vehicular light weighting by finite element simulation of E glass-based composite automotive seat, Materials Performance and Characterization, 8,3. DOI10.1520/MPC20180136
  23. Tyagi R.K., Singh A., (2019) Increasing the Comfort of the Harianavi Bullocks by Reduction of Contact Pressure on Neck by Designing a Body Contoured Yoke, Journal of Applied Animal Welfare Science, DOI10.1080/10888705.2019.1678037
  24. Vates, U. K., Singh, N. K., Sharma, B. P., & Sivarao, S. (2019). Optimization of Surface Roughness of D2 Steels in WEDM using ANN Technique. In Applied Surface Science. IntechOpen.
  25. Gupta, G., & Tyagi, R. K. (2019). An Experimental Evaluation of Mechanical Properties and Microstructure Change on Thin-Film–Coated AISI-1020 Steel. Materials Performance and Characterization, 8(3), 20180143. https://doi.org/10.1520/MPC20180143.
  26. NandJeeKanu, Eva Gupta, Umesh Kumar Vates, Gyanendra Kumar Singh, An insight into biomimetic 4D printing, RSC Adv., 2019, 9, 38209–38226.
  27. NandJeeKanu, Eva Gupta, Umesh Kumar Vates, Gyanendra Kumar Singh, Self-healing composites: A state-of-the-art review, Composites Part A 121 (2019) 474-486.
  28. Rajeev Kumar, Somnath Chattopadhyaya, G. K. Singh, Umesh Kumar Vates;  Modeling and Spark Erosion Drilling Process Optimization of Inconel 718 Using RSM Technique, Journal of Advanced Manufacturing Systems, World Scientific Publishing Company, Vol. 18, No. 1 (2019) 57–83
  29. Sivaraos, M.J. Raguvaran, Aidy Ali, M. F. Abdullah, D. Sivakumar, M.A.M Ali, A. Hambali, Ms. Salleh, K. Umesh; Investigation of Tyre Pressure Drop Phenomenon Using Specially Designed Real-Time Data Mining and Storage System, International Journal of Recent Technology and Engineering (IJRTE) ISSN: 2277-3878, Volume-7, Issue-5S4 (2019) 533-537
  30. Srivastava, P., Khanduja, D., Ganesan, S., Agarwal, M., Tulsiyan, M., Tandon, M., & Gupta, S. (2019). Risk analysis of CNG dispensing unit by fuzzy digraph matrix and dempster-shafer approach. International Journal of Productivity and Quality Management, 28(2), 227-255. doi:10.1504/IJPQM.2019.102922
  31. Panchal, D., & Srivastava, P. (2019). Qualitative analysis of CNG dispensing system using fuzzy FMEA–GRA integrated approach. International Journal of Systems Assurance Engineering and Management, 10(1), 44-56. doi:10.1007/s13198-018-0750-9
  32. Jamwal, A., Agarwal, A, Gupta, S., & Sharma, S. (2019) Study on the barriers to lean manufacturing implementation for small-scale industries in Himachal region (India). International Journal of Intelligent Enterprise. DOI: 10.1504/IJIE.2019.101129.
  33. Srivastava, P., Khanduja, D., Ganesan, S., Agarwal, M., Tulsiyan, M., Tandon, M., & Gupta, S. (2019). Risk analysis of CNG dispensing unit by fuzzy digraph matrix and Dempster-Shafer approach. International Journal of Productivity and Quality Management, 28(2), 227-255. DOI: 10.1504/IJPQM.2019.102922.
  34. Agrawal, S., Jamwal, A., & Gupta, S. (2020). Effect of COVID-19 on the Indian economy and supply chain. 2020050148. DOI: 10.20944/preprints202005.0148.v1.
  35. Jamwal, A., Prakash, P., Singh, N., Kumar, K.; Sadasivuni, K., Harshit, , Gupta, S. & Gupta, P. (2019) “Microstructure, Wear and Corrosion Characteristics of Cu matrix reinforced SiC-Graphite Hybrid Composites” Journal of Composite Materials. DOI: 10.1177/0021998319832961.
  36. Garg, P., Jamwal, A., Kumar, D., Sadasivuni, K. K., Hussain, C. M. & Gupta, P. (2019) Advance Research Progresses in Aluminium Matrix Composites: Manufacturing & Applications, Journal of Materials Research and Technology, 8(5), 4924-4939. DOI:1016/j.jmrt.2019.06.028
  37. Mehta, J., Grewal, J.S., Sadasivuni, K. K., & Gupta, P., (2019) Analysis of wear behavior and surface properties of detonation gun sprayed composite coating of Cr3C2-NiCr-CeO2 on boron steel, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 233(12), 2433-2443. DOI: 10.1177/1464420719862300
  38. Jamwal, A., Prakash, P., Kumar, D., Singh, N., Sadasivuni K. K., Kumar H., Gupta S., and Gupta P. (2019), Microstructure, Wear & Corrosion Characteristics of Cu Matrix reinforced SiC-Graphite hybrid composites, Journal of Composite Materials, 53(18), 2545-2553. DOI: 10.1177/0021998319832961
  39. K. Singh, D.B. Singh, A. Mallick, Harender, S.K. Sharma, Navneet Kumar, and V.K. Dwivedi, (2019), Performance analysis of specially designed single basin passive solar distillers incorporated with novel solar desalting stills: A Review, Solar Energy, Elsevier, Vol. 185, pp. 146-164. (https://doi.org/10.1016/j.solener.2019.04.040)
  40. Mathur, S., Kumar, R. and Mathur, V.(2019), “Mathematical Modelling and Fuzzy analysis of Hot runner in comparison to Cold runner in Injection Moulding”, Journal of Advanced Manufacturing Systems,Vol.18 No.4, PP.657–676. https://doi.org/10.1142/S0219686719500343 .
  41. Kumar, R. (2019), “Kaizen a Tool for Continuous Quality Improvement in Indian Manufacturing Organization”, International Journal of Mathematical, Engineering and Management Sciences, Vol. 4, No. 2, pp. 452–459. https://dx.doi.org/10.33889/IJMEMS.2019.4.2-037 .

Year – 2018

  1. Anoop Kumar Shukla, et al., “Thermodynamic Performance Evaluation of SOFC Based Simple Gas Turbine cycle” International Journal of Applied Engineering Research ISSN 0973-4562 Volume 13, Number 10 (2018) pp. 7772-7778
  2. Anoop Kumar Shukla, Meeta Sharma, Akash Singh, Sukrit Johri, and Harsh Pratap Singh, Parametric Analysis of Solar Energy Conversion System Using Parabolic Concentrator and Thermopile, International Journal of Ambient Energy, (2018), https://doi.org/10.1080/01430750.2018.1517672
  3. Bhandwal M., Kumar M., Sharma M., Srivastava U., Verma A., Tyagi R.K., (2018) The effect of using the turbulence enhancement unit before the catalytic converter in diesel engine emissions, International Journal of Ambient Energy, 39,1,PP73-77 DOI10.1080/01430750.2016.1237889
  4. Bhandwal, M., Kumar Tyagi, R., Singh Sikarwar, B. (2018). Estimate the performance of catalytic converter using turbulence induce devices. International Journal of Engineering, Transactions B: Applications. Volume 31, Issue 5, Pages 856 – 862. DOI 5829/ije.2018.31.05b.23.
  5. Bhandwal, M., Kumar Tyagi, R., Singh Sikarwar, B. (2018). Estimate the performance of catalytic converter using turbulence induce devices. International Journal of Engineering, Transactions B: Applications. Volume 31, Issue 5, Pages 856 – 862. DOI 5829/ije.2018.31.05b.23.
  6. Chauhan, M.K., Dutta, S., More, B.S., Gandhi, B.K. (2018). Experimental investigation of flow over a square cylinder with an attached splitter plate at intermediate Reynolds number. Journal of Fluids and Structures, 76, 319-335.DOI: 1016/j.jfluidstructs.2017.10.012
  7. Gahlaut, U., Gupta, P., Agnihotri, R., Mathur, P., & Ratna, S. (2018). A comparative thermal and structural analysis of different disc brake materials. International Journal of Mechanical and Production Engineering Research and Development, 8(6), 419-424. doi:10.24247/ijmperddec201846
  8. Gupta, P., Kumar, D., Prakash, O., Jha, A.K. and Sadasivuni, K. K., (2018) Dependence of Wear Behavior on Sintering Mechanism for Iron-Alumina Metal Matrix Nanocomposites, Material Chemistry and Physics, 220, 441-448, DOI:1016/j.matchemphys.2018.08.079
  9. Gupta, S., Dangayach, G. S., Singh, A. K., & Rao, P. N. (2018). Adoption of Sustainable Supply Operation Quality Practices and their impact on Stakeholder’s Performance & Sustainable performance for Sustainable Competitiveness in Indian Manufacturing Companies. International Journal of Intelligent Enterprise. DOI: 10.1504/IJIE.2018.091185.
  10. Kumar, S., Singh, R. V., & Phanden, R. K. (2018). Optimization of Job Shop Scheduling with Transportation Time Using Genetic Algorithm. MR International Journal of Engineering & Technology, 8(1),16-24. DOI: 10.6084/m9.figshare.16610182.v1
  11. Gupta, S., Dangayach, G. S., Singh, A. K., Meena M. L. & Rao, P. N. (2018). Implementation of sustainable manufacturing Practices in Indian manufacturing companies. Benchmarking: an International Journal. DOI: 10.1108/BIJ-12-2016-0186.
  12. Jaiswal, P., Kumar, A., & Gupta, S. (2018) Prioritization of Green Manufacturing Drivers in Indian SMEs Through IF-TOPSIS Approach. U.P.B. Sci. Bull., Series D, 80 (2), 277-292.
  13. Khosla, P., Singh, H. K., Katoch, V., Dubey, A., Singh, N., Kumar, D., & Gupta, P. (2018) Synthesis, Mechanical and Corrosion Behaviour of Iron-Silicon Carbide Metal Matrix Nanocomposites, Journal of Composite Materials, 52(1), 91-107, DOI: 10.1177/0021998317702439
  14. Mathur, B., Gupta, S., Meena, M. L., & Dangayach, G. S. (2018). Healthcare supply chain management: literature review and some issues. Journal of Advances in Management Research. DOI: 10.1108/JAMR-09-2017-0090.
  15. Mathur, B., Gupta, S., Meena, M. L., & Dangayach, G. S. (2018). Impact of Supply chain practices on Organizational Performance with Moderating effect of Supply chain performance in Indian Health Care Industry International Journal of Supply Chain Management. 7 (4).
  16. Meena, M. L., Jain, R., Kumar, P., Gupta, S., & Dangayach, G. S. (2018). Process improvement in an Indian automotive part manufacturing company: a case study. International Journal     of      Productivity      and      Quality      Management, 23(4), 524-551.
  17. Mehta, J., Grewal, J. S. & Gupta, P., (2018) Wear Behavior of Boron Steel Coated Cerium Oxide Tungsten Carbide Cobalt Coating, Journal of Applied Science and Engineering, 21(4), 519-526. DOI:6180/jase.201812_21(4).0003
  18. Misra, S., Ratna, S., & Singh, U. K. (2018). Analysis of solidification thickness during phase change using heat balance integral method. International Journal of Mechanical and Production Engineering Research and Development, 8(2), 1339-1348. doi:10.24247/ijmperdapr2018172
  19. NandJeeKanu, Eva Gupta, Umesh Kumar Vates, Gyanendra Kumar Singh, Sachin Chavan, Fracture problems, vibration, buckling and bending analyses of functionally graded materials-a state-of-the-art review including smart FGMS, Particulate Science and Technology vol 36 issue 2 653-673.
  20. Nori, N. S. A., Saifuddin, M., & Ratna, S. (2018). Cam shaft material selection using multi-objective optimization on the basis of ratio analysis-(MOORA) method. International Journal of Mechanical and Production Engineering Research and Development, 8(3), 1023-1028. doi:10.24247/ijmperdjun2018108
  21. Panchal, D., Jamwal, U., Srivastava, P., Kamboj, K., & Sharma, R. (2018). Fuzzy methodology application for failure analysis of transmission system. International Journal of Mathematics in Operational Research, 12(2), 220-237. DOI: 10.1504/ijmor.2018.089678
  22. Panchal, D., Jamwal, U., Srivastava, P., Kamboj, K., & Sharma, R. (2018). Fuzzy methodology application for failure analysis of transmission system. International Journal of Mathematics in Operational Research, 12(2), 220-237. doi:10.1504/IJMOR.2018.089678
  23. Ratna, S., & Prasad, D. (2018). Ann based optimization model for die casting of aluminium alloy LM6. International Journal of Mechanical and Production Engineering Research and Development, 8(2), 1207-1214. doi:10.24247/ijmperdapr2018160
  24. Ratna, S., Shubham, A., & Saifuddin, M. (2018). Assessment of lean performance of manufacturing cells in an SME using AHP. International Journal of Mechanical and Production Engineering Research and Development, 8(3), 435-440. doi:10.24247/ijmperdjun201847
  25. Samant, S., Mittal, V. K., & Prakash, R. (2018). Resource Optimization for an Automobile Chassis Manufacturer through Value Stream Mapping Enhanced with Simulation Technique and Constraint Programming. International Journal of Industrial and Systems Engineering, 28(3), 379-401.DOI:10.1504/IJISE.2018.089746
  26. Sekhar, T. V. R., Prakash, R., Nandan, G., and Muthuraman, M. (2018c). Performance enhancement of a renewable thermal energy collector using metallic oxide nanofluids. Micro & Nano Letters, 13(2):248–251.
  27. Sekhar, T. V. R., Prakash, R., Nandan, G., and Muthuraman, M. (2018d). Pressure drop characteristics & Efficiency enhancement by using TiO2-H2O nanofluid in a Sustainable Solar thermal energy Collector. International Journal of Environment and sustainable development.
  28. Sharma, S., Jain, R., Rawat, V., Hundekar, P.R., Singh, N., Kumar, D., & Gupta, P. (2018) Structural and mechanical characterization of re-pressed and annealed iron-alumina metal matrix nanocomposites, Journal of Composite Materials, 52(11), 1541-1556, DOI: 10.1177/0021998317726589
  29. Shukla, A. K., Sharma, A., Sharma, M., and Nandan, G. (2018). Thermodynamic investigation of solar energy-based triple combined power cycle. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 41(10):1161–1179.
  30. Sinha M., Ranjan R., Tyagi R.K., (2018) Design and development of GRF aqua silencer by e-glass composite for reduction of noise and particulate matter in automotive diesel engine, International Journal of Automotive and Mechanical Engineering, 15,4, PP5976-5988.
  31. Sivaraos, Kumar Umesh, M. S. Salleh, D. Sivakumar, R. Izamshah, M. A. M. Ali, Mathematical Modelling And Conceptual Design of Novel Automatic Tyre Inflating System, JurnalTeknologi,80:6 (2018) 123–131.
  32. Srivastava, P., Khanduja, D., & Agrawal, V. P. (2018). Integrating agile thinking into maintenance strategy performance analysis. International Journal of Process Management and Benchmarking, 8(2), 228-245. doi:10.1504/ijpmb.2018.090785
  33. Tyagi R.K., Singh A. (2018) Case Study: Composite Material Yoke Versus Wooden Yoke for Bullocks’ Comfort, Journal of Applied Animal Welfare Science, 21,2, PP103-107.DOI10.1080/10888705.2017.1364999

Year – 2017

  1. Anoop Kumar Shukla, Onkar Singh, “Thermodynamic Analysis of Steam Injected Gas Turbine Cycle Power Plant with Inlet Air Cooling” International Journal of Ambient Energy Vol. 38 (6) 2017 pp 556-566
  2. Anoop Kumar Shukla, Onkar Singh, “Thermodynamic Investigation of parameters affecting the Execution of Steam Injected Cooled Gas Turbine based Combined Cycle Power Plant with Vapor Absorption Inlet Air Cooling” Applied Thermal Engineering 122(2017) 380-388
  3. Chhabra, M., Sharma, A., &Dwivedi, G. (2017). Performance evaluation of diesel engine using rice bran biodiesel. Egyptian Journal of Petroleum, 26 (2), 511-518. DOI: 10.1016/j.ejpe.2016.07.002.
  4. Kamboj, K., Singh, G., Sharma, R., Panchal, D., & Hira, J. (2017). Heat transfer augmentation in double pipe heat exchanger using mechanical turbulators. Heat and Mass Transfer, 53(2), 553-567.DOI: 10.1007/s00231-016-1838-x
  5. Kumar, R., Singh, R.K. (2017), "Coordination and Responsiveness issues in SMEs Supply Chains: A Review", Benchmarking: an International Journal, Vol.24 No.03, pp.1-18. https://doi.org/10.1108/BIJ-03-2016-0041 .
  6. KumarVates, U., Singh, G. K., Sharma, B. P., & Jain, T. (2017). Change In Microstructure of Heat Treated Ti-6al-4v Alloy In Different Temperatures And Strain Rate. Journal of Manufacturing Engineering, 12(3), 174-178.
  7. Mayank Chhabra, Ajay Sharma, Gaurav Dwivedi,Performance evaluation of diesel engine using rice bran biodiesel,Egyptian Journal of Petroleum,Volume 26, Issue 2,2017,Pages 511-518,ISSN 1110-0621,https://doi.org/10.1016/j.ejpe.2016.07.002.
  8. Mehta, J., Mittal, V.K. and Gupta, P. (2017) Role of Thermal Spray Coatings on Wear, Erosion and Corrosion Behavior: A Review, Journal of Applied Science and Engineering, 20(4), 445-452. DOI: 10.6180/jase.2017.20.4.05
  9. Navneet Kumar, D.B. Singh and S.K. Sharma, (2017), CFD analysis of two-phase flow characteristics in horizontal pipeline, International Journal of Advance Research in Science and Engineering, Vol. 6, Sp. Issue No. 02, pp.163-177.
  10. Ranjan R., Tyagi R.K. (2017) Emission characteristic of hydrogen and gasoline blend in spark-ignited engine, International Journal of Ambient Energy, 38, 1, PP14-18 DOI10.1080/01430750.2015.1023840
  11. Rohit Singla, and Harish Parthasarathy, “Simple exclusion model applied to nano-robots", Robotics and Autonomous Systems, Elsevier, Vol. 96, pp. 15-25, Oct. 2017. https://doi.org/10.1016/j.robot.2017.05.009
  12. Sekhar, T. V. R., Prakash, R., Nandan, G., and Muthuraman, M. (2017). Preparation of Co3O4-H2O nanofluid and application to CR-60 Concentrating Solar Collector. Progress in Industrial Ecology, An International Journal, 11(3):227–246.
  13. Sharma, M., & Singh, O. (2017). Exergy analysis of the dual pressure HRSG for varying physical parameters. Applied Thermal Engineering, 114, 993-1001.
  14. Sharma, M., & Singh, O. (2017). Investigations for performance enhancement of dual pressure HRSG in gas/steam combined cycle power plants. International Journal of Ambient Energy, 38(4), 339-346.
  15. Shubham Rai, S.K. Prashant, Anurag Kumar, Rahul, Mishra, Umesh Kumar Vates and G.K. Singh (2017). Optimization of Process Parameters in Ti-6Al-4V During CNC Turning” middle east journal of scientific research, Vol. 25 (5), ISSN 1990-9233, pp. 939-949.
  16. Singh, N., Majumdar, R., Gupta, P. & Kumar D. (2017), Polymer Assisted Co-precipitation Route for the Synthesis of Al2O3-13%TiO2 Nanocomposite, Bulletin of Materials Science, 40(3), 527-535. DOI:1007/s12034-017-1402-4
  17. Singh, R.K., Kumar, R. and Kumar, P. (2016), “Strategic Issues in Pharmaceutical supply Chain: A Review”, International Journal of Pharmaceutical and Healthcare Marketing, Vol.10 No.03, pp.234-257.https://doi.org/10.1108/IJPHM-10-2015-0050.
  18. Singla, F.R., Agarwal, S.V. & Parthasarathy, T.H. Statistical analysis of tracking and parametric estimation errors in a 2-link robot based on Lyapunov function. Nonlinear Dyn 82, 217–238 (2015). https://doi.org/10.1007/s11071-015-2151-9
  19. Singla, R., Parthasarathy, H. & Agarwal, V. Classical robots perturbed by Lévy processes: analysis and Lévy disturbance rejection methods. Nonlinear Dyn 89, 553–575 (2017). https://doi.org/10.1007/s11071-017-3471-8
  20. Singla, R., Parthasarathy, H., Agarwal, V. et al. Feedback optimization problem for master–slave teleoperation tracking in the presence of random noise in dynamics and feedback. Nonlinear Dyn 86, 559–586 (2016). https://doi.org/10.1007/s11071-016-2908-9
  21. Verma, J., Nigam, S., Sinha, S., Sikarwar, B.S., Bhattacharya, A.. (2017). Irradiation effect of low-energy ion on polyurethane nanocoating containing metal oxide nanoparticles. Radiation Effects and Defects in Solids. Volume 172, Issue 11-12, Pages 964 – 974. DOI 1080/10420150.2017.1421190.